User's Manual

2-27
Base Station Setup
In order to minimize the possibility of accidentally changing the setup of a Base
Station when you really meant to change the RF Terminal, the Base Station
cannot be set up from the bar coded Setup Menu. The Base Station can only be
setup from a RF Terminal keypad and requires a jumper change inside the Base
Station before you can do so. We made changing Base Station parameters
difficult on purpose; any mistake can cut off communication with the host
computer and bring your system to a halt. As a safeguard, we suggest turning off
all other Base Stations or moving to an isolated area to setup a new Base Station.
Preparing the Base Station for Setup
Before you can set parameters on the Base Station, you must make a hardware
change on the Base Station itself.
1. Have all current RF Terminal users SIGN OFF the system.
2. Unplug the Base Station's power supply
3. Remove the cover to the Base Station.
4. Locate JP103 and move the jumper to the Programming position.