User's Manual

6-20
OnTermSequenceError
Data passed: terminal
Event: The one-for-one host prompt/terminal response protocol has
been violated. The host cannot send a second Input command
until it has received a response from the first Input command.
If a base station receives 5 sequence errors in a row, a Host
Logic error is generated and the base shuts itself down.
While PromptCom/ActiveX will intercept and prevent most
logic errors, they are still possible so you should
implement this event handler!
OnTermIllegalCommand
Data passed: terminal
Event: An illegal command has been sent to a terminal.
PromptCom/ActiveX is designed to prevent illegal
commands but software is not always perfect and we may
not have imagined all the ways in which our customers will
want to use it!
OnTermUpArrow
Data passed: terminal
Event: The up-arrow button has been pressed on a terminal. You
must issue another Input method call before WDterm can
respond to another keypress on the terminal.
OnTermDownArrow
Data passed: terminal
Event: The down-arrow button has been pressed on a terminal.
You must issue another Input method call before WDterm
can respond to another keypress on the terminal.
OnTermLeftArrow
Data passed: terminal
Event: The left-arrow button has been pressed on a terminal. You
must issue another Input method call before WDterm can
respond to another keypress on the terminal.
OnTermRightArrow
Data passed: terminal
Event: The right-arrow button has been pressed on a terminal.
You must issue another Input method call before WDterm
can respond to another keypress on the terminal.
OnTermBeginKey
Data passed: terminal
Event: The BEGIN button has been pressed on a terminal. You
must issue another Input method call before WDterm can
respond to another keypress on the terminal.