User's Manual

6-25
scanner. If shifted is set to "true", the terminal will start in
shifted mode. Timestamped appends a (hhmmss) prefix to
the returned data.
InputKeyBd
Parameters: basename, channel, terminal, line, position, prompt,
shifted, timestamped
Function: This instructs the terminal attached to client basename on
channel to display the prompt at line and position and wait
for data to be entered from the terminal keypad only. If
shifted is set to "true", the terminal will start in shifted
mode. Timestamped appends a (hhmmss) prefix to the
returned data..
InputScanner
Parameters: basename, channel, terminal, line, position, prompt,
allowbreakout, timestamped
Function: This instructs the terminal attached to client basename on
channel to display the prompt at line and position and wait
for data to be entered from the terminal scanner only.
Setting allowbreakout to true allow user to "breakout" of
scanner only mode by pressing the end key on the terminal.
A termID+CR will be sent to the host.
InputYesNo
Parameters: basename, channel, terminal, line, position, prompt
Function: This instructs the terminal attached to client basename on
channel to display the prompt at line and position and wait
for a Yes (Enter key or C key) or a No (0 key or B key)
from the terminal keypad.
Note: C and B keys are used to facilitate keypad entry
while scanning with the integrated laser.
InputPassword
Parameters: basename, channel, terminal, line, position, prompt, shifted
Function: This instructs the terminal attached to client basename on
channel to display the prompt at line and position and wait
for data to be entered from the terminal keypad only. The
entered data is not displayed on the terminal.
InputSerial
Parameters: basename, channel, terminal, line, position, prompt
Function: This instructs the terminal attached to client basename on
channel to display the prompt at line and position and wait
for data to be received through the terminal serial port.
Waiting for serial input can be bypassed by pressing the
enter key on the terminal which will send an empty data
string to the host (fires the OnTermData event handler).