Other Content

FAQ AND SPECIFICATIONS
To fell a standing tree, it’s recommended that you use a bar longer than the diameter of a tree. To
cut a tree that has already fallen, you can cut up to double the bar length minus a couple of
inches by making two cuts, one from each available side of the tree. For example: If the bar is
16” you can cut a log up to 30” in diameter. For complete safety details, please review your
owner’s manual.
With a saw designed to self-lubricate during operation, a little oil leakage is normal. To help
minimize and prevent leakage, we recommend the following:
-Use only enough oil for the task at hand.
-Remove oil cap and immediately replace it after operation to vent the oil tank. This relieves any
accumulated pressure during the oiling process.
-Allow the saw to cool down before storing.
-Wipe down the saw sprocket area.
-Remove oil from saw before storage.
-Store the saw horizontally when not in use.
The chain spins at 12 m/s.
There are 57 links on the 16” Electric Chainsaw chain. The chain is a 3/8 inch pitch and has a gauge of
0.05”. The file size for sharpening the included chain is 5/32”
Technical Specifications
 Rated Voltage
120V~60Hz
 Power Input
14.5 Amps
 BAR LENGTH
16"