User Guide

 Be sure to fully charge the battery (according to the supplied charger manual) before using to
ensure maximum runtime. Use only the supplied charger or other approved manufacturer
chargers.
 Expected runtime for the Hydroshot on High Speed running non-stop is around 15 minutes (up
to 30 minutes on Low Speed). Tool is designed for spot cleaning only and not jobs where a
normal pressure washer would be used.
o Use Low Speed and High Speed interchangeably depending on the task at hand to
extend runtime.
o Turn machine on/off between jobs to extend runtime.
 Batteries will become warm during usage and increase in temperature when used
continuously. However, there is an internal switch that will automatically shut the battery down
if it reaches a certain operation temperature.
o The battery should be cool before re-charging or it could impact the overall
performance.
 Store the battery in a dry and controlled temperature environment for maximum performance.
 Additional battery and fast charger accessories are also available.