2-in-1 cordless li-ion grass Trimmer/edger Taille-haie/tondeuse 2 en 1 sans fil li-ion podadora / bordeadora de césped sin cables “2 en 1” con batería de iones de litio Helpline numBeR 1-866-354-woRx (9679) en p07 f p15 es p24 Wg151.
1 2 10 5 3 4 8 7 6 9 b c a B A 17 C
B A C 17 d e 18 19 D E F G H1 H2 I J1 J2 16 K L M1 20 11 12 13 14 M2 15 N O
K L M1 20 11 12 13 14 M2 6 15 N O
1. Rear Handle 2. Auxiliary handle 3. Telescopic Shaft 4. Locking collar 5. Auxiliary handle locking lever 6. Safety Guard 7. Flower guard 8. Edger wheel 9. Line Cutter 10. Battery pack 11. Trimmer head cover (See Fig M2) 12. Cap release latch (See Fig M2) 13. Spool (See Fig M2) 14. Trimmer head (See Fig M2) 15. Eyelet (See Fig M2) 16. Line feed button (See Fig M1) 7 17. Charger (See Fig D) 18. Charged indicator light (Green) (See Fig D) 19. Charging indicator light (Red) (See Fig D) 20.
TECHNICAL DATA Voltage No load speed Cutting diameter Line diameter Machine weight 18V 8500/min 10”(250mm) 0.065”(1.65mm) 5.4lbs(2.4kg) Accessories Safety guard Charger Battery pack Edger wheel Wall mounts 1 1 1 1 1 We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details.
SAFETY INSTRUCTIONS WARNING! When using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: WARNING: Read all instructions FOR ALL APPLIANCES 1) Avoid Dangerous Environment - Don’t use appliances in damp or wet locations. 2) Don’t Use In Rain. 3) Keep Children Away - All visitors should be kept at a distance from work area. 4) Dress Properly - Do not wear loose clothing or jewelry.
2) Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3) Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4) Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
ASSEMBLY 1. ASSEMBLY OF THE SAFETY GUARD (See Fig A) Fix the safety guard to the trimmer head making sure the sides are located into the grooves on the trimmer head. Secure the safety guard onto the trimmer head with the screw (a) provided. 2. ASSEMBLE OF THE EDGER WHEEL (See Fig B) Insert the edger wheel assembly onto grooves of cutting head. Make sure the groove of the wheel is locked in the metal plate. Press the release button (b) on the wheel and pull out to take off the wheel.
trimmer has been switched off; wait until it has completely stopped then lay down the tool. 6. ADJUSTMENT OF THE TELESCOPIC SHAFT (See Fig G) Unscrew the locking collar (4) in the direction indicated to unlock. Adjust the length of the telescopic shaft to the most comfortable length. Tighten the lower locking collar. 7. MAIN HANDLE ROTATION (See Fig H1&H2) Holding the lower housing then pull upward the shaft, then rotate 90 degree clockwise, then release, the shaft will be locked in position automatically.
this is quit normal. After about 5 seconds the line will be cut to the correct length and the noise will reduce as the motor receives full speed. If the noise of the line being cut can’t be heard, more line will need to be fed out. To feed more line, it is first necessary to allow the trimmer to stop completely, then restart, allowing the motor to reach full speed. Repeat above until you hear the lines hitting against the line cutter.
power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. WARRANTY STATEMENT If your WORX tool becomes defective due to faulty materials or workmanship within a period of 2 years from the date of purchase, we guarantee to: • Replace or repair all defective parts, free of charge, or, • Repair products free of charge, or, • Replace the unit with a new or reconditioned unit, free of charge.
Designed in Italy. Made in China Conçu en Italie. Fabriqué en Chine Diseñado en Italia. Fabricado en China Copyright © 2009, Positec. All Rights Reserved.