Troubleshooting Guide

Function messages

Cutting grass according to the program setting.

When it senses rain, the

Landroid

will return to the Charging Base and stay there for the time you have

programmed it to do so. When dry, the

Landroid

CPU will automatically begin the delay and countdown

and then return to mowing. If you want

Landroid

to mow before this, simply turn it off then on again, but

only when the rain sensor is dry or you can set the delay time to 0 min.

Needs to recharge—during the journey to the base, the cutting blade is stopped in order to save energy.

Charge is in progress—charge percentage are displayed.

Stand-by, will start according to program set.

Error messages

Refer to the "Programming" section to re-set your PIN.

Turn the

Landroid

upright.

PAGE 1
Function messages Cutting grass according to the program setting. When it senses rain, the Landroid®M will return to the Charging Base and stay there for the time you have programmed it to do so. When dry, the Landroid®M CPU will automatically begin the delay and countdown and then return to mowing. If you want Landroid®M to mow before this, simply turn it off then on again, but only when the rain sensor is dry or you can set the delay time to 0 min.
PAGE 2
Landroid®M WG794- Auto mowing time schedule. Area sq.ft Auto mowing runtime hours Monday mowing hours Tuesday mowing hours Wednesday mowing hours Thursday mowing hours Friday mowing hours Saturday Sunday mowing mowing hours hours 1100 3 7:00-8:30 / / 7:00-8:30 / / / 2200 7 7:00-8:24 7:00-8:24 7:00-8:24 7:00-8:24 7:00-8:24 / / 3300 8 7:00-8:36 7:00-8:36 7:00-8:36 7:00-8:36 7:00-8:36 / / 4300 11 7:00-9:12 7:00-9:12 7:00-9:12 7:00-9:12 7:00-9:12 / / 5400 13.