Installation Instructions

2.3

If there is an island that sits inside your lawn where you don't want

Landroid

M to go, please follow the path as shown in the picture to

peg your wire.

The wire should run from the perimeter to outline the deﬁned island

and then return back to the perimeter. The boundary wire between

the island and perimeter should be laid close together and held in

place by the same wire peg. During operation, the Landroid

M will be

able to freely pass over this part of the wire.

<2cm

2.2

A feature, such as ﬂowers or shrubs that are close to the mowing

boundary, should be part of the boundary as shown in the picture.

10cm

35cm

>1m