SAFETY AND OPERATING MANUAL High frequency multi-function tool WX670 WX671
SAFETY INSTRUCTIONS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1. WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
4. POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
8. Use the original accessories and the tool provided, no others. 9. Only use accessories in good condition. Do not use torn or worn accessories. 10. Do not use a damaged plug and cable, if damaged have them repaired. Always be aware of the cord location. 11. Do not abuse the cord. Never use the cord to carry the tools or pull the plug from the outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. 12.
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear eye protection Double insulation Wear ear protection Wear dust mask WEEE marking High frequency multi-function tool WX670 WX671
� � �� � � � � � � � 1. VARIABLE SPEED CONTROL (WX671) 2. VENTING SLOTS 3. SEGMENT SAW BLADE* 4. STANDARD STRAIGHT CUTTER* 5. ALLEN KEY 6. FLANGE 7. BOLT 8. SANDING PAPER* 9. SANDING PAD* 10. ON/OFF SWITCH *Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA WX670 Rated voltage WX671 220-240 V~50/60 Hz Rated power Oscillations speed 250 W 20000 /min Oscillations angle 11000-20000 /min 3.2° Protection class /II Weight 1.3 Kg NOISE INFORMATION A weighted sound pressure 85 dB (A) A weighted sound power 96 dB (A) KPA&KWA 3.
significantly reduce the exposure level over the total working period. Helping to minimise your vibration exposure risk. ALWAYS use sharp chisels, drills and blades. Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate) If the tool is to be used regularly then invest in anti vibration accessories. Avoid using tools in temperatures of 100C or less. Plan your work schedule to spread any high vibration tool use across a number of days.
OPERATION INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. 1. MOUNTING THE TOOL (See A1.A2) CAUTION: For all work or when changing application tools,always wear protective gloves. Danger of injury from the sharp edges of the application tools. Application tools can become very hot while working. Danger of burns! WARNING: Do not let the segment saw blade (3) and the straight cutter (4) face backwards like A2, that may hurt user’s hand. Unscrew the bolt (7).
C 5. SECURING THE WORK PIECE CAUTION:Before working your tool make sure that no live cables will be damaged. WARNING: Do not touch the gear box after long working time, because it could be hot. Sanding Typical application: wood, metal; small areas, especially corners, edges and places difficult to access. Select high oscillation frequency (WX671). Sanding with a constant movement and light pressure. Pressing on heavily does not increase the removal – the sanding sheet merely becomes worn faster.
WORKING HINTS FOR YOUR TOOL ENVIRONMENTAL PROTECTION If your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run it with no load for 2-3 minutes to cool the motor. Avoid prolonged usage at very low speeds. Always keep the blade sharp. Always ensure the work-piece is firmly held or clamped to prevent movement. Any movement of the material may affect the quality of the cutting or sanding finish.
DECLARATION OF CONFORMITY We, Positec Power Tools YO51 9NR, UK Declare that the product, Description WORX High frequency multi-function tool Type WX670 WX671 Complies with the following Directives, EC Machinery Directive 98/37/EC EC Low Voltage Directive 2006/95/EC EC Electromagnetic Compatibility Directive 2004/108/EC Standards conform to EN 55014-1 EN 55014-2 EN 61000-3-2 EN 61000-3-3 EN 60745-1 EN 60745-2-4 2008/05/08 Jacky Zhou POSITEC Quality Manager High frequency multi-function tool WX670 WX671
Positec Power Tools (Europe) Ltd, Positec House, Becklands Close, Bar Lane Industrial Estate, Boroughbridge, North Yorkshire, YO51 9NR, UK.
