SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Battery Charger WA3772
PRODUCT SAFETY GENERAL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
SYMBOLS Read the operator’s manual Warning For indoor use only Double insulation 3.15 Fuse Positive terminal Negative terminal 3 Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice.
1 4 3 Battery charger 2 WA3772
CHARGING PROCEDURE 1. BATTERY PACK* 2. CHARGER 3. CHARGE INDICATOR LIGHT NOTE: Before using the tool, read the instruction book carefully. *Not all the accessories illustrated or described are included in standard delivery. We recommend that you purchase your accessories listed in the above list from the same store that sold you the battery charger. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. 2.
5. Green on Fully Charged Green flash b. -- - - - - Charging BATTERY TEMPERATURE PROTECTION This charger has a battery temperature protection feature. When the charger detects a battery pack that is too hot or cold (the light will be red and flash), it automatically activates the protection circuit, and suspends charging until the battery pack has reached the correct temperature. The charging process will then automatically begin (the light will be green and flash).
to clean your charger. Wipe clean with a dry cloth. Always store your charger in a dry place. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. ENVIRONMENTAL PROTECTION Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice.
After-sales Service and Application At www.worx.com you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: 0345 202 9679 E-Mail: customerservices@worxtools.com www.worx.com Copyright © 2020, Positec. All Rights Reserved.
