Operation Manual

12
3-in-1 Grass Trimmer/Edger
EN
SYMBOL ASSEMBLY
1. ASSEMBLY OF THE SAFETY GUARD
(See Fig. A)
Remove a screw from the Guard; attach the
Safety Guard to the trimmer head. Align the
Guard so it slides into the slots located on the
trimmer head. Turn the tool over and secure
the Safety Guard onto the trimmer head with
the screw (a) provided.
2. ASSEMBLY OF THE EDGE /TRIMMING
SUPPORT WHEELS (See Fig. B1, B2, B3)
With the tool right side up, slide the Edge /
Trimming Support Wheels (12) assembly
onto the metal plate located on the side of
the Cutting Head (See B1) or underneath
the Safety Guard(5) (See B2 B3). Make sure
the grooves of the Edge /Trimming Support
Wheels assembly locks onto the metal plate,
you will hear it click into place.
To remove the wheel assembly, press the
release button (b) on the wheels and pull the
wheels outside.
OPERATION INSTRUCTIONS
INTENDED USE
The machine is intended for the cutting of
grass and weeds under bushes, as well as on
slopes and edges that can not be reached with
the lawn mower.
WARNING! The charger and Battery
Pack are specially designed to work
together so do not attempt to use any other
devices. Never insert or allow foreign metallic
objects into your charger or Battery Pack
connections because of electrical failure and
other hazards that will occur.
1. BEFORE USING YOUR CORDLESS
GRASS TRIMMER
Your Battery Pack is UNCHARGED and it must
be fully charged once before it is used.
The battery charger supplied is matched to the
Li-Ion battery for use with this tool. Do not use
another battery charger.
Warning
Read instruction manual
Do not expose to rain or water
Do not burn
Wear eye protection
Keep bystanders away
Do not expose to moisture.
This product has been marked
with a symbol relating to removing
electric and electronic waste. This
means that this product shall not
be discarded with household waste
but that it shall be returned to a
collection system which conforms to
the European Directive 2002/96/CE.
It will then be recycled or dismantled
in order to reduce the impact on the
environment. Electric and electronic
equipment can be hazardous for
the environment and for human
health since they contain hazardous
substances.
Edging
Trimming