Operation Manual

7
3-in-1 Grass Trimmer/Edger
EN
TECHNICAL DATA
Type WG169E WG169E.5 WG169E.9 (1-designation of machinery, representative of
Grass Trimmer)
WG169E WG169E.5 WG169E.9
Voltage 20V
Max*
No load speed 7600/min
Cutting diameter 30cm
Line diameter 1.65mm
Charging time 3hr approx. 1hr approx. /
Machine weight 2.6kg 2.6kg 2.2kg
*Voltage measured without workload. Initial battery voltage reaches Maximum of 20volts.
Nominal voltage is 18volts.
NOISE INFORMATION
A weighted sound pressure according to Annex E of EN 786 L
pA
= 78dB(A)
K
pA
3.0dB(A)
A weighted sound power according to Noise Directive 2000/14/EC L
wA
= 94dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration emission value according to Noise Directive 2000/14/EC
a
h
= 2.8m/s²
Uncertainty K
1.5m/s²
WARNING! The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool