Cordless Hedge Trimmer Taille-haies sans fil Cortasetos Inalámbrico EN P05 F P12 ES P20 WG255 WG255.1 WG255.9 WG275 WG275.9 WG280 WG280.
2 5 3 6 4 7 1 8 9 A B1 1 2 1 3 B2 C
C B2 1 2 D1 D2 D3 E
1. BATTERY PACK* 2. REAR HANDLE 3. FRONT HANDLE 4. SAFETY GUARD 5. FRONT SWITCH LEVER (ALL AROUND SWITCH FUNCTION) 6. REAR SWITCH LEVER 7. BATTERY PACK RELEASE BUTTON 8. BLADE 9. BLADE SHEATH *Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA WG255 WG255.1 Voltage 20V Cutting length 20inch Cutting diameter 9/16inch Charging time Machine weight Approx.3~5hr Approx.5hr / 5.1lbs 5.3lbs 4.6lbs WG275 Voltage WG275.9 32V WG280.9 40V Max** 20inch Cutting diameter 9/16inch 3/4inch Approx. 5hr / Approx.8hr / 5.6 lbs 4.6lbs 5.8lbs 4.4lbs Machine weight 6 WG280 Max** Cutting length Charging time WG255.9 Max** **Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts.
WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks and cement and other masonry products and • Arsenic and chromium from chemicallytreated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
HEDGE TRIMMER SAFETY WARNINGS 1. Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after turn off. A moment of inattention while operating the hedge trimmer may result in serious personal injury. 2. Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device cover.
15) When possible, remove the battery from the equipment when not in use. 16) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents. 17) Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance.
OPERATING INSTRUCTIONS WARNING! DO NOT USE THE PRODUCT WITHOUT ATTACHING THE GUARD AND FRONT HANDLE. ASSEMBLY & OPERATION ACTION FIGURE ASSEMBLY Assembling the Front Handle See Fig. A Installing and Removing the battery pack See Fig. B1, B2 Charging the battery pack More details can be found in WA3732/WA3740/WA3742/ WA3747’s manual See Fig.
www.worx.com Copyright © 2016, Positec. All Rights Reserved. Copyright © 2016, Positec. Tous droits réservés. © Derechos reservados 2016, Positec. Todos los derechos reservados.
