SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Electric Blower WG518E
2 1 7 6 5 4 3 B A Click! Click! 2 1 C D
D C OFF ON E I II
PRODUCT SAFETY GENERAL SAFETY WARNINGS WARNING!Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. IMPORTANT READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE.
disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the machine if the cord is damaged or worn. h) Keep extension cords away from moving hazardous parts to avoid damages to the cords which can lead to contact with live parts. i) If an extension cord is used make sure it is for outdoor use and marked as such. The recommended size of extension cord is not lighter than 2×0.75 mm2.
unclogging chute, Before checking, cleaning or working on the machine. m)Avoid using the machine in bad weather conditions especially when there is a risk of lightning. - 4) Maintenance and storage a) Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition; b) Replace worn or damaged parts. c) Use only genuine replacement parts and accessories. d) Store the machine in a dry place out of the reach of children.
The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of exposure. 1. HANDLE 2. ON/OFF SWITCH WARNING: The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used dependant on the following examples and other variations on how the tool is used: How the tool is used and the materials being cut or drilled.
PLUG REPLACEMENT (ONLY FOR REWIRABLE PLUG OF UK & IRELAND) Using the Blower Hold the blow tube approximately 8—20cm above the ground when operating the tool. Use a sweeping motion from side to side. Advance slowly keeping the accumulated debris/leaves in front of you. After blowing the debris/leaves into a pile, it is easy to dispose of the pile. CAUTION! —Do not blow hard objects such as nails, bolts, or rocks. —Do not operate the blower near bystanders or pets.
DECLARATION OF CONFORMITYY We, Positec Power Tools (Europe) Ltd, PO Box 6242, Newbury, RG14 9LT, UK Declare that the product Description Electric Blower Vacuum Type WG518E (5-designation of machinery, representative of Electric Blower) Function Blowing debris Complies with the following Directives, 2006/42/EC, 2014/30/EU, 2011/65/EU, 2000/14/EC amended by 2005/88/EC 2000/14/EC amended by 2005/88/EC: - Conformity Assessment Procedure as per Annex V. - Measured Sound Power Level 100.
www.worx.com Copyright © 2016, Positec. All Rights Reserved.