Product Manual

1110
Snow thrower EN
1110
thrower when the plug is connected
to the power socket and the switch is
turned on.
3. Personal safety
a. Stay alert - Watch what you are doing
and use common sense when operating
the snow thrower. Do not use the machine
when tired, ill, or under the influence of
drugs, alcohol, or medication. A moment of
inattention may result in serious personal
injury.
b. Wear proper clothing - Wearing rubber
boots offers additional protection from
electric shock. Do not wear loose clothing
or jewelry that may become caught in
the machine.Wear protective headgear
to keep hair away from revolving parts of
the machine. Safety glasses offer better
protection than everyday eyeglasses.
c. Moving parts present risks - Keep
your face, hair, clothing, hands and feet
away from moving parts. All guards and
safety attachments must be installed
properly before using the unit. Shut off and
disconnect cord before touching any parts
other than the handles and switch.
d. Surfaces - This snow thrower is intended
for use on paved surfaces. Do not use on
gravel, stone, or other unpaved surfaces
unless the snow thrower is adjusted for
such surfaces according to the instructions
given in the operator’s manual.
e. Avoid accidental starting - Make sure
the switch is in the off position before
plugging in the unit. Do not carry the snow
thrower with your finger on the switch.
f. Body position - Maintain proper footing
and balance at all times. Place heels firmly
on the ground and tightly grasp the handle
bar. Watch for uneven surfaces and do
not overreach. In case you fall or collide
with the snow thrower, inspect the unit for
damage. When stepping backwards, be
careful to avoid obstacles beneath your
feet or behind you to avoid falling.
4. Snow thrower use and care
a. Read the operator’s manual carefully.
Learn your snow thrower’s applications
and limitations as well as the specific
potential hazards related to this machine.
Do not use this machine for any purpose
other than the one for which it was
designed. Otherwise, it may cause
mechanical defaults, serious damage or
personal injury.
b. Preliminary unit inspection - Thoroughly
inspect the unit before use.Make sure all
the parts are secure and installed correctly.
If you notice any abnormalities, do not
use the machine until it has been properly
repaired. Always perform a test run the
first time you use the snow thrower or after
replacing parts to ensure that the unit is
functioning properly.
c. Preliminary area inspection - Clear
the area to be plowed before each use.
Remove all objects such as rocks, broken
glass, nails, wire, or string, which can be
thrown by or become entangled in the
snow thrower. Keep the area of operation
clear of all persons, particularly children
and pets.
d. Excessive force - The snow thrower
was designed to respond at a certain rate
for various snow conditions for optimum
safety and performance. Do not force it;
keep pressure constant.
e. Malfunctioning switch - Do not use the
snow thrower if the switch does not turn
it on and off. Any electrical appliance that
cannot be controlled by the switch is not
safe to use and must be repaired.
f. Hitting an object - If the snow thrower
accidentally strikes an object, first stop
the snow thrower; inspect for damage;
repair or replace any damaged part before
restarting and operating the snow thrower.
g. Discharge chute safety - Never direct
the snow discharge chute at the operator,
at bystanders, at vehicles or at windows.
The throwing snow and foreign objects
accidentally picked up by the snow thrower
can cause serious damage and personal
injury. Do not use your hands to unclog
the discharge chute. Stop the motor before
removing debris.
h. Hand-held operating position -
Operation of the snow thrower in the