Product Manual

Snow thrower EN
1514
1514
OPERATION
1. Do not put hands or feet near or under
rotating parts. Keep clear of the discharge
opening at all times.
2. Exercise extreme caution when operating
on or crossing gravel drives, walks, or
roads. Stay alert for hidden hazards or
traffic.
3. After striking a foreign object, stop the
motor, disconnect the cord on electric
motors, thoroughly inspect the snow
thrower for any damage, and repair the
damage before restarting and operating
the snow thrower.
4. If the unit should start to vibrate
abnormally, stop the motor and check
immediately for the cause. Vibration is
generally a warning of trouble.
5. Stop the motor whenever you leave the
operating position, before unclogging the
collector / impeller housing or discharge
guide, and when making any repairs,
adjustments, or inspections.
6. When cleaning, repairing, or inspecting,
make certain the collector / impeller and
all moving parts have stopped. Disconnect
the plug from mains to prevent accidental
starting.
7. Do not clear snow across the face of
slopes. Exercise extreme caution when
changing direction on slopes. Do not
attempt to clear steep slopes.
8. Never operate the snow thrower without
proper guards, plates or other safety
protective devices in place.
9. Never operate the snow thrower near glass
enclosures, automobiles, window wells,
drop-offs, and the like without proper
adjustment of the snow discharge angle.
Keep children and pets away.
10. Do not overload the machine capacity by
attempting to clear snow at too fast a rate.
11. Never operate the machine at high
transport speeds on slippery surfaces. Look
behind and use care when backing.
12. Never direct discharge at bystanders or
allow anyone in front of the unit.
13. Disengage power to the collector / impeller
when snow thrower is transported or not in
use.
14. Use only attachments and accessories
approved by the manufacturer of the
snow thrower (such as wheels weights,
counterweights, cabs, and the like).
15. Never operate the snow thrower without
good visibility or light. Always be sure of
your footing, and keep a firm hold on the
handles. Walk; never run.
MAINTENANCE AND STORAGE
1. Check shear bolts and other bolts at
frequent intervals for proper tightness to
be sure the equipment is in safe working
condition.
2. Always refer to operator’s guide
instructions for important details if the
snow thrower is to be stored for an
extended period.
3. Maintain or replace safety and instruction
labels, as necessary.
4. Run the machine a few minutes after
throwing snow to prevent freeze-up of the
collector / impeller.
should be auger