40V Cordless Lawn Mower Tondeuse à gazon sans fil de 40V Podadora inalámbrica 40V EN P02 F P19 ES P31 WG750 WG750.
WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks and cement and other masonry products; • Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
GENERAL SAFETY WARNINGS FOR BATTERY PACK WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1) WARNING: Risk of fire and burns. Do not disassemble, heat above 100°C (212°F), or incinerate. Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight. 2) Dispose of used battery promptly..
13. Do not operate machine while under the influence of alcohol or drugs. 14. Never operate mower in wet grass. Always be sure of your footing; walk; never run. 15. Disengage the drive system, if so equipped, before starting the motor. 16. If the machine should start to vibrate abnormally, stop the motor and check for the cause immediately. Vibration is generally a warning of trouble. 17. Always wear eye protection when operating machine. 18.
h) i) down. Exercise extreme caution when changing direction on slopes. Do not mow excessively steep slopes. Never operate the mower without proper guards, plates, or other safety protective devices in place. Do not wash with a hose, avoid getting water in motor and electrical connections. 1.4 Maintenance a) Check the blade and the motor mounting bolts at frequent intervals for proper tightness. b) Keep al nuts, bolts, and screws tight to be sure the equipment is in safe working condition.
1 2 3 4 5 14 13 12 11 6 6 10 9 8 7 40V Cordless Lawn Mower EN
1. SAFETY KEY 2. SWITCH LEVER 3. UPPER HANDLE 4. LOCK CAM LEVER 5. LOWER HANDLE 6. GRASS COLLECTION BAG 7. CUTTING HEIGHT ADJUSTMENT KNOB 8. INTELLICUT DIAL 9. BATTERY INDICATOR LIGHT 10. BATTERY PACK COVER 11. SAFETY FLAP 12. BAG HANDLE 13. CABLE CLIP 14. GRASS BAG INDICATOR 15. MULCHING INSERT (SEE FIG. D1) 16. BATTERY PACK (SEE FIG. F) * 17. BLADE BOLT (SEE FIG. P1) 18. BLADE (SEE FIG.
ACCESSORIES WG750 WG750.9 Battery pack(WA3580) 2 / Charger (WA3877) 1 / Grass collection bag 1 Mulching insert 1 Only use the appropriate accessories intended for this tool. Accessory information can be found on the product packaging, at a WORX dealer or on our website at www.worx.com.
A1 A2 1 1 2 A3 A4 9 A5 B1 40V Cordless Lawn Mower EN
B2 B3 C1 C2 3 1 2 10 C3 C4 40V Cordless Lawn Mower EN
D2 D1 1 1 1 1 22 2 2 15 D3 D4 11 D5 E1 100% 1 2 40V Cordless Lawn Mower 0% EN
E2 F 16 G H1 H2 I1 12 2 1 40V Cordless Lawn Mower EN
J I2 TURBO ECO TURBO ECO K ECO 4 TURBO 5 6 3 1——(1/1/2”)38mm 2——(1/7/8”)48mm 3——(2/1/3”)58mm 4——(2/2/3”)68mm 5——(3”)78mm 6——(3/1/2”)88mm 2 1 L 1 1 a 13 2 2 b M N1 N2 L O1 40V Cordless Lawn Mower O1-1 EN O1-2
N2 L O1 O1-1 O1-2 O1-3 P1 O2 O2-1 O2-2 14 O2-3 18 17 P2 40V Cordless Lawn Mower EN
ASSEMBLY AND OPERATION ACTION FIGURE ASSEMBLY Assembling the handle bar See Fig. A1, A2, A3, A4, A5 Adjusting the upper handle height NOTE: Do not adjust the upper handle out of the scope of the three levels on the lock cam levers. Make sure the two lock cam levers are on the same level. Always check that the upper handle is fixed firmly. See Fig. B1, B2, B3 Assembling the grass collection bag See Fig.
BATTERY STATUS (See Fig. G) Before starting or after use, press the button “POWERTEST” on the machine to check the battery capacity. During operation, the battery capacity will be indicated automatically by the battery power indicator. The indicator constantly senses and displays the battery condition as follows: Battery power indicator status 16 Battery condition Only one green ) light ( is illuminated. At least one battery is depleted and needs to be charged. Two green lights ( ) are illuminated.
Note: 1. Be sure the mower is turned off and remove the key. 2. Place the mower in stand up storage mode. TO SHARPEN BLADE IN A VISE (SEE Fig. O1) 1. Be sure the switch lever is released, the blade has stopped and the safety key removed before removing the blade. 2. Remove blade from mower. See instructions for removing and attaching blade. 3. Secure blade O1-1 in a vise O2-2. 4. Wear safety glasses and be careful not to cut yourself. 5.
TROUBLE SHOOTING Problem Solution 1. Mower doesn’t run when switch lever is activated. A. Check to make sure safety key has been installed and is fully seated and that button on switch housing is being completely pushed. B. Release Switch Lever to turn mower off. Remove safety key, turn mower over and check that blade is free to turn. If not free, return to an authorized servicer. Blade should turn freely. C. Has battery been fully charged? Plug in charger and wait for green light to come on. 2.
www.worx.com Copyright © 2017, Positec. All Rights Reserved. Copyright © 2017, Positec. Tous droits réservés. © Derechos reservados 2017, Positec. Todos los derechos reservados.
