2AMP 2-in-1 Lawn Edger/Trencher Coupe-bordure/ tailleur de tranchées deux-en-un de 12A Bordeadora/zanjadora de jardín 2 en 1 de 12AMP EN P06 F P00 ES P00 WG896
2 1 3 4 12 5 6 11 7 8 10 9
A B 1 3 2 C2 C1 D1 1 2 D2 1 2 2 1 D3 1 2 E1 1 2
1 D3 E2 2 E1 F 1 2 1 2 1 2 2 1 Depth Indicator Indicateur de profondeur Indicador de profundidad G1 G2
1. AUXILIARY HANDLE 2. ON/OFF SWITCH 3. EXTENSION CORD RETAINER 4. LOCKING KNOB 5. UPPER TUBE 6. LOWER TUBE 7. REAR WHEEL 8. BLADE GUARD 9. BLADE 10. FRONT WHEEL 11. EDGE GUIDE KNOB 12. CUT DEPTH KNOB TECHNICAL DATA Rated Voltage 6 120V~60Hz Rated Power 12A Rated No-load speed 4700/min Protection class /II Blade diameter 7-1/2”(190mm) Blade cutting depth 1”, 1-1/4”, 1-1/2” Machine weight 14lbs(6.3kg) We recommend that you purchase your accessories from the same store that sold you the tool.
IMPORTANT SAFETY INSTRUCTIONS 9) WARNING: When using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: WARNING: Read all instructions WARNING: This product maybe contains lead, phthalate or other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Please wash your hands after use.
18) Maintain Appliance With Care Keep cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Inspect appliance cord periodically, and if damaged, have it repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.
ADDITIONAL SAFETY RULES FOR EDGER-TRIMMERS 1. Keep guards in place and in working order Keep blades sharp. Keep hands and feet away from cutting area. 2. 3. SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Double insulation ASSEMBLY & OPERATION Action Figure Assembly Assembling the Main Handle See Fig. A Assembling the Auxiliary Handle See Fig. B Attaching the Extension Cord See Fig. C1 & C2 Operation Setting to the edging position See Fig. D1 Edging See Fig.
TRENCHING AND LANDSCAPING OPERATION The Edger can also be used for Trenching. The blade will leave a small trench for placing Wire underground. Because of the direction of the Blade rotation the Edger can kickback towards the operator if it hits an obstruction such as thick, matted grass. Keep a firm grasp on the Handle, especially when trenching in thick, matted material.
www.worx.com Copyright © 2014, Positec. All Rights Reserved.
