Use and Care Manual

12AMP 2-in-1 Lawn Edger/Trencher EN
9
ADDITIONAL SAFETY RULES
FOR EDGER-TRIMMERS
1. Keep guards in place and in working
order
2. Keep blades sharp.
3. Keep hands and feet away from cutting
area.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Double insulation
1
2
Edging position
1
2
Trenching position
Before any work on the machine
itself, pull the power plug from
the outlet
Blade continues to rotate after
the machine is switched off. Wait
until all machines components
have completely stopped before
touching them
Keep bystanders away
ASSEMBLY & OPERATION
Action Figure
Assembly
Assembling the Main Handle See Fig. A
Assembling the Auxiliary Handle See Fig. B
Attaching the Extension Cord
See Fig. C1
& C2
Operation
Setting to the edging position See Fig. D1
Edging
See Fig. D2
&D3
Adjusting cut depth
See Fig. E1
& E2
Setting to the trenching/
landscaping position
See Fig. F
Trenching and landscaping
operation
Removing and attaching the
blade
See Fig. G1
& G2
OPERATION INSTRUCTION
NOTE: The edger is a major appliance and
should not be operated simultaneously
with other major appliances on the same
household circuit.
WARNING: Make sure that other
persons and pets are at least 100
feet away.
EDGING
1. Before starting the edger, line up the tool
so the edge guide rests against the edge
of the paved surface. Both rear wheels
should be on the paved surface when
edging. (See Fig. D2)
2. To avoid kickback of edger, tilt the handle
down so the blade is above the ground
(See Fig. D3).