User Guide

20V Max Lithium Blower EN
8
OPERATION
INTENDED USE:
The blower is intended for residential use
only. Use the blower outdoors to move yard
debris as needed.
Assembly and Operation
ACTION FIGURE
Assembling & disassembling
the Blower Tube
See Fig. A
& B
Installing & Removing the
Battery Pack
NOTE: Depress the battery
release button to release battery
pack from your tool. After
recharging, insert the battery
pack into tool’s battery port. A
simple push and slight pressure
will be sufficient.
See Fig. C
& D
Checking the battery condition
Your battery pack is UNCHARGED,
you must charge before use.
Charging the battery
More details can be found in
WA3742’s manual.
WARNING! The charger and
battery pack are specially
designed to work together, so do not
attempt to use any other devices.
Never insert or allow metallic objects
into your charger or battery pack
connections because of an electrical
failure and hazard will occur.
See Fig. E
Starting & Stopping
WARNING! The tool runs
for a few seconds after it
has been switched off.
Let the motor come to a
complete standstill before
setting the tool down.
See Fig. F
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Wear eye protection
Wear ear protection
Keep bystanders away
Warning of hazard
Do not use in the rain or leave
outdoors while it is raining.
Remove battery from the
socket before carrying out
any adjustment, servicing or
maintenance.
Li-Ion battery, battery must be
recycled
POSITEC Inc. has established
a partnership with the RBRC
Corporation to recycle any
Positec batteries with the
RBRC-call2recycle seal. For
environmental protection, please
do not discard batteries in the
trash. After the batteries’ life cycle
is ended, then please call 1-800-
822-8837 for a free service that will
properly dispose of the battery.