Installation Guide

Set work area

Keep pressing

for 3 seconds. When the icon is blinking,

press

. A number will be blinking on the display, for example,

, which is the lawn area. The working time will be

automatically set according to the size of your garden. Use

to set the lawn area (the area will increase / decrease

by 50m

each time the / is pressed), and press to

conﬁrm. Then Landroid

will enter the standby page.

Change default start time

The default start time of 8:00 can be changed to anytime by keep

pressing both

and buttons at the same time until a

ding sound is heard.

For example, keep pressing both

and buttons at 14:05,

and your Landroid

will start mowing from 14:05.

STOP

Only for reference