Owner's Manual

ManualsBrandsWORX ManualsGarden and DIYWR130 300 M2 Landroid Robotic Lawnmower

Owner’s Manual EN

C. Clean the contact pins and the charging strips

Clean the contact pins located on the charging base and the charging strips located on Landroid

using a cloth. Remove

any built up grass clippings or debris around the contact pins and charge strips periodically to ensure Landroid

successfully charges each time.

9.3



Battery life

The heart of Landroid

is its 20V Li-Ion battery. For proper storage of the battery, make sure it is fully charged and kept in a

cool dry place.

NOTE: The recommended Landroid

operation temperature is between 0-55

The life-span of Landroid

’s battery depends on various factors,

such as:

• The length of the mowing season in your region

• Amount of hours Landroid

mows per day

• Battery maintenance during storage

Landroid

can be charged manually without the

boundary wire.

1. Connect the charging base to a suitable power

supply. The green light on the charging base will turn

on.

2. Manually dock Landroid

into the charging base

while Landroid

is powered off. (See Fig. P)

3. The green light on the charging base will turn to red.

Landroid

will begin to charge.

9.4 Winter hibernation

Your Landroid

will live longer and healthier if it is allowed to hibernate. So even though it is troublesome, we recommend

storing your Landroid

in your shed or garage during the winter.

Before you prepare your Landroid

for winter hibernation, we recommend you:

• Thoroughly clean your Landroid

• Fully charge the battery and remove it from Landroid

• Turn power off

To maximize the battery life, fully charge the battery and remove it from Landroid

before storage during winter.

WARNING: Protect the underside of Landroid

from water. NEVER store Landroid

upside down

outdoors.

The boundary wire can be left in the ground but its ends should be protected, such as placed in a tin can with grease. If the

charging base is left outside for the winter, leave the boundary wire connected.

NOTE: When bringing Landroid

back to work after winter hibernation, make sure the charging strips and contact pins are

clean. We recommend using a fine grade emery cloth to clean the contacts. Using the App, make sure the date and time

are correct and send Landroid

back to what it loves doing: mowing.