Owner’s Manual EN WR142E WR143E WR145E WR146E WR153E WR154E WR155E WR156E P02
ORIGINAL INSTRUCTIONS TABLE OF CONTENTS 1. Product Safety 1.1 General & Additional Safety Instruction 1.2 Information on the Landroid® 3 2. Component list 7 3. Technical data and noise data 3.1 Technical data 3.2 Noise data 9 4. Control panel 11 5. Understanding Your Landroid® 5.1 How does my Landroid® know what to mow? 5.2 How does my Landroid® know where to go? A. Finding the charging base B. Rain sensors C. Sensing the boundary wire D. Starting and stopping while mowing 5.3 Cut to Edge 5.
1. Product Safety 1.1 General & Additional Safety Instruction WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe operation of the machine. Save all warnings and instructions for future reference.
WARNING! Automatic lawnmower! Keep away from the machine! Supervise children! 2. ADDITIONALLY WHEN THE APPLIANCE IS OPERATING AUTOMATICALLY a) Do not leave the machine to operate unattended if you know that there are pets, children or people in the vicinity. MAINTENANCE AND STORAGE WARNING! When the mower is turned upside down, the power key must always be switched off. The power key should be switched off during all work on the mower’s underframe, such as cleaning or replacing the blades.
k) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. l) Battery pack gives its best performance when it is operated at normal room temperature (20 °C ± 5 °C). m) When disposing of battery packs, keep battery packs of different electrochemical systems separate from each other. n) Recharge only with the charger specified by WORX. Do not use any charger other than that specifically provided for use with the equipment.
1.2 Information on the Landroid® WARNING - Robotic lawnmower can be dangerous if incorrectly used. Read through the Operator’s manual carefully and understand the content before using your robotic lawnmower. WARNING - Keep a safe distance from the machine when operating. WARNING - Operate the disabling device before working on or lifting the machine. WARNING - Do not ride on the machine. Do not burn Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem.
2. Component List 2 3 4 WR142E WR143E WR145E WR146E WR153E WR154E WR155E WR156E 11 12 13 14 1 6 15 Wed.
1. CUTTING HEIGHT ADJUSTMENT KNOB 2. CHARGING STRIP 3. RAIN SENSOR 4. REAR DRIVING WHEEL 5. BATTERY PACK 6. STOP BUTTON 7. DISPLAY 8. KEYPAD 9. ON/OFF KEY 10. START KEY 11. USB PORT 12. CUTTING BLADE 13. BLADE TURNING DISC 14. FRONT WHEEL 15. HANDLE 16. CONTACT PINS 17. CHARGING BASE 18. POWER ADAPTER 19. WIRE PEGS 20. BOUNDARY WIRE 8 21. CHARGING BASE FIXING NAILS 22. BOUNDARY WIRE DISTANCE GAUGE 23. HEX KEY 24.
3. Technical data and noise data 3.1 Technical data Type WR142E WR143E WR145E WR146E WR153E WR154E WR155E WR156E (100-199 designation of machinery, representative of Robotic Lawnmower) WR142E WR145E WR143E WR146E WR153E WR154E WR155E WR156E Rated voltage 20V No load speed Cutting area 2800/min 700m2 Cutting diameter 2200/min 1000m2 1500m2 18cm 2000m2 22cm Cutting height 30-60mm Cutting height positions 4 Battery type Lithium-ion Battery model Charging time approx. Max.
ACCESSORIES WR142E WR145E WR143E WR146E WR153E WR154E WR155E WR156E Screw 9 9 9 9 Charging base 1 1 1 1 Charging base fixing nails 8 8 8 8 150m 180m 200m 250m 210 250 270 340 Hex key 1 1 1 1 Boundary wire distance gauge 2 2 2 2 Blade 9 9 9 9 Battery pack (WA3553) 1 1 1 / Battery pack (WA3556) / / / 1 Charger (WA3755.1/WA3750.
4. Control panel HOME Sends Landroid® to its charging base during operation and activates charging Wed.
5. Understanding Your Landroid® Congratulations on your new purchase of Landroid® and welcome to the care-free life of automatic mowing. In the following, we want to help you to better understand how your Landroid® thinks. 5.1 How does my Landroid® know what to mow? 12 Landroid® chooses its direction at random. It will make sure your entire lawn is evenly mowed without leaving unattractive mowing paths (See Fig. A).
5.2 How does my Landroid® know where to go? Your Landroid® is made to work on its own. Landroid® knows when it needs to go to its charging base to charge, can sense when it is raining, can stop itself if it senses a problem, and knows to stop, drawback, and turn around when it bumps into something blocking its path. Landroid® will also automatically stop its blade turning disc from rotating if it is lifted off the ground to prevent an accident. A.
Only for reference Only for reference Wed.03/21 12:14 Wed.03/21 12:14 E1 E2 5.3 Cut to edge Off-centered blade turning disc design provides a clean cut with narrowest distance to the boundary or wall. It helps minimize the amount and frequency of manual trimming along the boundary. Additionally, Landroid® is designed with a protective cover underneath that prevents objects from touching the turning blades and/or injury. (See Fig. F) “Cut to Edge” Tech F 14 5.
Your Landroid® loves mowing grass and requires the cutting blades to be kept in good condition to cut at its best. Landroid® can do most things by itself, but will sometimes need your help to prevent damage to itself. • Never let Landroid® travel over gravel. • Remove or prevent access to obstacles that Landroid® could accidentally climb on and damage its blade turning disc. • Remove all debris and foreign objects from your lawn. 6. App Your Landroid® is able to connect with smartphone.
6. If you have a “Fritz!box” Router, please make sure activate “Allow communication between devices in same network” in the settings. 7. Mare sure Port 8883 TCP is open. If it’s blocked (See Fig. 3), please modify the setting. Fig. 3 To connect smartphone to your Landroid®: Step 1: To download the Landroid® App, scan the QR code below or download it from Playstore (Google-Android), AppleStore (Apple-iOS) or our website www.worx.com.
area exactly. Your Landroid® will become confused by extra bends or coils of boundary wire that are not part of its mowing area (See Fig. I). If there is excess boundary wire after the mowing area has been outlined, cut it off and store this additional wire in a separate location. It is important to leave the necessary length where it connects to the charging base so it can be connected and still remain buried. 7.
(1) Locate the latest software version at: www.worx.com. Save the file to an empty FAT32 formatted USB (flash drive). Delete any other files on the drive and check the format. If the drive is not formatted in FAT32, please reformat the drive. NOTE: the software update is downloaded as a zipped file. You will need to unzip or extract it before proceeding. (2) Place Landroid® on a secure and level surface. Press to turn off your Landroid®. (3) Insert the USB drive (flash drive) in the port. (See Fig.
edges and minimize the frequency of replacing the blades. Each cutting blade will last up to 2 months when it is programmed to mow every day. Always check to see if the blades are chipped or damaged and replace them if they are. When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with your Landroid®. Spare blades are also available at your nearest WORX retailer. A.
C. Clean the contact pins and the charging strips Clean the contact pins located on the charging base and the charging strips located on Landroid® using a cloth. Remove any built up grass clippings or debris around the contact pins and charge strips periodically to ensure Landroid® successfully charges each time. 9.3 Battery life The heart of the Landroid® is its 20V Li-Ion Battery. For proper storage of the battery, make sure it is fully charged and kept in a cool dry place.
10. Function Messages Cutting grass cutting grass according to the program setting Raining The rain sensor detects water. Landroid® will return to the charging base and stay there for the time you have programmed it to do so. When dry, Landroid® will automatically begin the delay and countdown and then return to mow. If you want Landroid® to mow before this, simply turn it off then on again, but only when the rain sensor is dry or you can set the delay time to 0 min.
Mower trapped! Press "START" to reset Landroid® is trapped. Mower lifted! Press Landroid® is lifted up. "START" to reset 1. Turn power off. 2. Take Landroid® to a lawn area clear of obstacles, turn power on. Press 3. If the error message is still displayed: turn power off, turn Landroid® upside-down and check there’s nothing lifted up. 4. Remove any possible object, turn Landroid® upright, turn power on. Upside down! Press Landroid® is upside down. “START” to reset Turn Landroid® upright.
Red light turns on the charging base. ® Landroid turns on, but the blade disc does not move. ® Landroid vibrates. The boundary wire isn’t connected or boundary wire is broken. Check that the boundary wire has been connected correctly to the charging base. Check there are no breaks in the boundary wire, especially in the wire ends. Landroid® is searching for the charging base (except that you press the HOME button to make it go to the charging base, or the “Border cut” function is operating).
Landroid® cannot correctly dock with the charging base. Environmental influences. Reposition the charging base. Avoid of a wall, metal or other objects. Poor connection caused by debris on the charging strip. Clean the contact pins located on the charging base and the charging strip on Landroid® using a cloth. The boundary wire on both sides of the charging base is not long enough. Make sure the boundary wire on both sides of the charging base is straight for at least 0.8m.
Landroid® stops in the working area. Landroid® flips over. There is an obstacle in the working area. Exclude the obstacle from Landroid®’s working area. The cutting area is larger than the allowable cutting area for Landroid®. Reduce the cutting area. The extended boundary wire should not exceed 400m or it may cause signal problem. The cutting height is set too low for the length of the grass. The grass is too dense. Raise the cutting height and then gradually lower.
Declaration of Conformity We, Positec Germany GmbH Grüner Weg 10, 50825 Cologne, Germany Declare that the product, Description Robotic Lawnmower Type WR142E WR143E WR145E WR146E WR153E WR154E WR155E WR156E (100-199 - designation of machinery, representative of Robotic Lawnmower) (Year, article number and month of serial number are placed on the back page. The complete serial number is clearly stated on the enclosure of lawnmower) with battery charger WA3755.1/WA3750.1/WA3751/WA3762 and charging base WA4002.
Copyright © 2018, Positec. All Rights Reserved.
