Instructions / Assembly

3534
EN
Quick reference
Upside down! Press START to
reset.
This could have happened when
Landroid came into contact with a
sloping surface which made it overturn.
Turn Landroid upright and remove any
obstacle that might have caused
Landroid to overturn.
Mower trapped! Press START to
reset.
Landroid is trapped. Turn power off.
Take Landroid to an area of your lawn
free of obstacles, then turn power on.
Press start.
If the error message is still displayed:
turn power off, turn Landroid
upside-down. Check if there is anything
preventing the wheels from rotating.
Remove any obstruction, turn the
Landroid upright, turn power on.
Mower lifted! Press START to reset. Landroid is lifted up. Turn power off.
Take Landroid to an area clear of
obstacles, turn power on. Press start.
If the error message is still displayed:
turn power off, turn Landroid
upside-down and check there’s anything
that can cause Landroid to be lifted up.
Remove any possible object, turn
Landroid upright, turn power on.
Battery voltage too low! Please
change battery.
Battery exausted. In this case you must turn Landroid off
and place it in the charging base, then
‘Emergency charging’ will be displayed
and it will start charging.
If the battery error still persist, your
battery is damaged and need to be
changed.
Wire missing! Press START to reset. Machine can’t find boundary wire signal. If the LED light is red, check if the
boundary wire is well connected to the
clamps on the charging base.
If the problem persists, check that the
boundary wire hasn’t been cut.
Battery temperature out of range!
Please wait.
Temperature is too high (more than
131°F) when charging.
Place the charging base in a shady area
or wait until the temperature has cooled
down.