Owner’s manual (WR220 WR235）
Owner’s manual Manuel utilisateur Instrucciones de usuario EN P04 F P39 ES P70
EN TABLE OF CONTENTS Welcome Page 05 Contact information Page 06 Safety Instruction Page 11 Information on Landroid Vision Get familiar with Landroid Vision Page 12 Component List Page 13 Getting to know Landroid Vision Page 14 Technical data Page 15 What’s in the box Getting started Page 16 How Landroid Vision works Page 19 Preparation and planning Page 22 Start the Landroid Vision Page 24 Machine Setting Page 26 Connecting Landroid Vision to the internet Maintenance Page 27 Keep i
Welcome EN Thank you for purchasing a Worx Landroid Robot Mower. This manual will help you get set up and operate your Landroid safely and efficiently. We’re here to help: Support www.worx.com/landroid-support Customer Services Helpline 800-727-6260 Live Chat www.worx.
General & Additional Safety Instruction EN WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks and cement and other masonry products; • Arsenic and chromium from chemically-treated lumber.
General & Additional Safety Instruction b) c) d) e) EN Add a magnetic strip to separate it from the neighbor’s lawn. The machine returns when it encounters a magnetic strip while mowing. Return along the magnetic strip when returning. Periodically inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other foreign objects. Periodically inspect and clean the boundaries between grass and non-grass.
General & Additional Safety Instruction EN underframe, such as cleaning or replacing the blades. a) Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition. b) Inspect the robotic lawnmower each week and replace worn or damaged parts for safety. c) Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced.
General & Additional Safety Instruction EN charging instructions. l) Do not leave battery pack on prolonged charge when not in use. m)After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. n) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment. o) Retain the original product literature for future reference.
General & Additional Safety Instruction EN the e.i.r.p. limit; (iii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; (iv) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.
Information on Landroid Vision EN INFORMATION ON LANDROID VISION WARNING – robotic lawnmower can be dangerous if incorrectly used. Read through the Operator’s manual carefully and understand the content before using your robotic lawnmower. WARNING - Keep a safe distance from the machine when operating. WARNING – Activate the disabling device before working on or lifting the machine. WARNING - Do not ride on the machine.
Get familiar with Landroid Vision EN COMPONENT LIST A A D B E C L F G H J I K The picture is only for reference A Worx Landroid Vision H Power supply B Charging tower I 20V battery C Charging base plate J Magnetic strip D Spare blades kits K Manuals E Hex key L RFID F Screws M Fiat lux G Magnetic strip pegs 12
Get familiar with Landroid Vision GETTING TO KNOW LANDROID VISION EN Cutting height adjustment Battery slot A Safety stop button Interface Rain sensor Battery cover button High Pitched Alarm Slot Find My Landroid B Camera Charge contact The picture is only for reference 13
Get familiar with Landroid Vision EN TECHNICAL DATA WR210 WR220 Rated voltage 20V No load speed (/min) Cutting area (acre) Max.* 2200 /min 1/4 acre 1/2 acre Cutting diameter (in.) 1 acre 8.7 in. (220 mm) Cutting height (in.) 1.57-3.54 in. (40-90 mm) Cutting height positions 6 Battery type Battery Capacity WR235 Lithium-ion 4 Ah 5 Ah Battery model included WA3578 WA3571 Charging time approx. (mins.) 76 mins.
Get familiar with Landroid Vision EN WHAT’S IN THE BOX WR210 WR220 WR235 Screws 18 18 18 Charging tower 1 1 1 Charging base plate 1 1 1 Magnetic strip pegs 8 8 8 Hex key 1 1 1 Blade (WA0190) 9 9 9 RFID 4 4 4 Magnetic strip (5m) 1 1 1 Fiat lux 1 1 1 Battery pack (WA3571/WA3578) 1 1 1 Charger (WA3752) 1 1 / Charger (WA3797) / / 1 We recommend that you purchase genuine replacement parts listed in the above list from the same store that sold you the mower.
Getting started EN HOW LANDROID VISION WORKS In the following section, we would like to help you better understand how Landroid Vision works. Landroid Vision is equipped with an AI (Artificial intelligence) camera sensor, enabling it to automatically work on its own.
Getting started EN Easy cleanning Landroid Vision is IPX 5 waterproofed and can be washed by using a regular garden hose. Self-leveling cutting deck Landroid Vision’s ‘Ground Tracer’ automatically adjusts the blade’s height to mirror small undulations on the lawn surface. Charge itself When your Landroid Vision needs to recharge its battery, it will stop mowing and follow the border in anti-clockwise direction back to its charging base.
Getting started EN Cutting Height Before starting your Landroid Vision at the first time, make sure your grass is not longer than 10cm. If it isn’t, use a regular mower to cut it before operating Landroid Vision. If you want to drastically shorten the height of your grass, it is recommended that you do so progressively, by adjusting the cutting height in steps.
Getting started EN PREPARATION AND PLANNING Preparing your Worx Landroid Vision to work is easier if you carefully follow these instructions. In addition to this manual, you can watch the comprehensive video tutorials on our YouTube channel*. * This information is provided for your convenience but cannot subsitute the instruction manual and the safety instructions that need to be read and understood.
Getting started EN 1. PATROL YOUR LAWN TO PLAN INSTALLATION 1.1 Plan for the charging base (see Fig. 1) The charging base composed of charging base plate and charging tower, is where your Landroid Vision goes to have its battery recharged. It’s also the parking lot where it rests in between one mowing session and the next. Locate a proper position for it, bearing in mind: A. The station needs to sit on flat land to ensure effective docking. B.
Getting started EN G. Narrow passage (See Fig. 15) Make sure the narrow passage is wider than 1m. NOW ROLL YOUR SLEEVES UP. WHEN IT’S DONE IT’S DONE! Now that you have planned the installation in every detail, you are ready to take action. Before starting, you may want to use your old mower for the last time to clean up your lawn and make the installation easier. 2. INSTALL THE CHARGING BASE Position the charging base Option A: Position the charging base at the corner of your lawn (See Fig.
Getting started EN START THE LANDROID VISION Get familiar with the control panel Landroid Vision’s control panel provides the key functions in a minimalistic design. For advanced functions, the free Landroid Vision app provides further options in a richer interface: your smartphone. Wed.
Getting started EN I. J. K. L. Insert the USB stick in the port. Turn on Landroid Vision. Without lifting Landroid Vision, remove the USB stick when “Please remove the USB key” is displayed. The update will begin automatically and may take a while. Landroid Vision will restart automatically after the update is completed. NOTE: Make sure Landroid Vision is charging and the battery capacity has reached 50% prior to starting the firmware update. 3. Identify the boundary (See Fig.
Getting started EN MACHINE SETTING Advanced functions via the built-in interface Despite its minimalistic design, you can set several advanced functions through the built-in control panel. However, for the best user experience, we recommend you to use the free Landroid Vision app to do this, given its much richer and intuitive interface.
Getting started You want to decrease the current schedule of 5 hours per day, M-F, by 30%. Rotate the would subtract 30% of the current work time to yield: (300 min) x [1 - (30/100)] = 210 minutes (3.5 hours) per day. EN until the screen reads “-30%”. This 5. Adjust the blade height (See Fig. 31) A. Back to home page, clockwise rotate to select General settings and press to confirm. B. Clockwise rotate to select Blade height adjustment, press to confirm. C.
Getting started EN CONNECTING LANDROID VISION TO THE INTERNET Why should you connect your Landroid Vision? Your Landroid Vision can be connected by Wi-Fi or Bluetooth Landroid Vision is an IoT (Internet of Things) device. To get full functionality out of your Landroid Vision and keep it updated with the latest software, it must be connected to the internet via your Wi-Fi network. Please see our privacy policy at https://www.worx. com/privacy-policy.
Maintenance EN MAINTENANCE Your Landroid Vision, works hard and needs to be cleaned and checked from time to time. This section of our guide helps you keep Landroid Vision in good shape so it can last for years without trouble. Here’s how to take care of your Landroid Vision. Switch off the machine before carrying out any service or maintenance. 1. Keep it sharp Landroid Vision does not cut grass like other mowers.
Maintenance EN A. For the proper storage of the battery, make sure it is fully charged and kept in a cool dry place. B. The recommended Landroid Vision operation temperature is between 3-55°C. C. The life-span of Landroid Vision’s battery depends on hours of usage and the length of use per day during the mowing season. 3.1 Landroid Vision can be charged manually A. Connect the charging base to a suitable power supply. The green light on the charging base will turn on. B.
Quick reference EN OPERATION MESSAGES MESSAGE LANDROID VISION ACTION Cutting grass Cutting grass according to the mowing schedule. The rain sensor detects water. Landroid Vision will return to the charging base and stay there for the time you have programmed it to do so. When dry, Landroid Vision will automatically begin the rain delay countdown and then return to mow.
Quick reference MESSAGE EN CAUSE ACTION Wheel motor is blocked in some way. Turn power off and take Landroid Vision to an area free from obstacles. Turn power on. Press start. If the error message is still displayed, turn power off. Turn Landroid Vision upside-down and check if there’s anything preventing the wheels from rotating. Remove any obstruction, turn Landroid Vision upright, turn power on.
Quick reference EN NOTES A. Before turning power on, always check Landroid Vision is inside its working area. If not, the message “Outside working area! Press START to reset” will be displayed. This message is also displayed when Landroid Vision is partly but not completely inside its working area. B. If for any reason—i.e. a party, children playing...—you want to park your Landroid Vision in the charging base: press home then . Landroid Vision will go to its base and stay there.
Quick reference SYMPTOM The mower does not charge. CAUSE SOLUTION There is no power. Check the power cord is connected properly to the charger and the charger is connected to a suitable power supply. Make sure both the charging strips on the mower touch the center of the charging contacts on the charging pile. Something is clogging in the blade disc creating friction and increasing power consumption. Take off the blade disc and clean it. Maybe the grass is too high and too thick.
Quick reference SYMPTOM Landroid Vision shuts off when docking in the charging pile. Landroid Vision stops in the working area. Landroid Vision flips over. Landroid Vision fails to connect to the internet. Your Landroid Vision beeps when you are adjusting “month / hour / minute” EN CAUSE SOLUTION Landroid Vision fails to charge due to over temperature protection and is powered off. Place the charging base in a shady area or wait until the temperature has cooled down. Poor connection.
EN HELPLINE NUMB WARRANTY STATEMENT FOR Worx Landroid Vision® Worx offer 3 years warranty period to Landroid Vision robotic mower from date of purchase, except for accessories and consumables.
