Owner's Manual

24
EN
1. Settings (See Fig. 27)
Rotate the clockwise to choose between General Settings, Working Time and Security. Press the to select General settings
, working time or security , and press once to enter. To go back one, press the key. Use the same method to take
the follow-up actions.
2. Set date & time (See Fig. 28)
Rotate the clockwise to select “DAY” and press the . The selected number will be blinking; continue to rotate the
clockwise to select the desired number and press the to confirm. Use the same method to complete for month/year/hour/
minute.
3. Set a Schedule (See Fig. 29)
Following the same instructions as date & time, use the to select the day of the week and set the time to schedule Landroid
Vision. Border cut can also be enabled/disabled for each day. Anticlockwise rotate to activate the setting. For aquicker way to
schedule, it is recommended to download the Landroid Vision app.
4. Customize work time (See Fig. 30)
This feature enables a quick adjustment of daily work time without the need to change work times for each individual day.
Anticlockwise rotate to activate the setting. For example, if you wanted to increase total work schedule to compensate for
a higher growth rate during the peak of mowing season, simply rotate the to an appropriate positive percentage increase.
Conversely, if you wanted to decrease total work time to compensate for the latter half of the mowing season when growth rates
slow, simply rotate the to an appropriate negative percentage decrease. This setting can also be adjusted via the app.
This adjustment follows a simple calculation:
DWT x [1+ (WT%/100)] = TWT
DWT = Daily work time
WT% = Work time percentage adjustment
TWT = Total work time
Example:
MACHINE SETTING
Advanced functions via the built-in interface
Despite its minimalistic design, you can set several advanced functions through the built-in control panel.
However, for the best user experience, we recommend you to use the free Landroid Vision app to do this, given its much richer
and intuitive interface.
* Be continuously updated according to the software version.
** For after-sales service only
General settings
Working time
Security
Navigation
Page *
Language
Time format
Date format
Set date & time
Rain start delay
App link
Diagnose**
Auto Work Time
Customize work time
Define zones
Customize work zone
Change PIN code
Auto-Lock
Getting started