SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS PALM SANDER WU645 WU645.
General power tool safety warnings c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Symbols 8 Only use accessories in good condition. Do not use torn or worn 9 10 11 12 13 14 accessories. Do not use a damaged plug or cord, if damaged have them repaired. Always be aware of the cord location. Do not abuse the cord. Never use the cord to carry the tools or pull the plug from the outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately.
Component list 1 On-Off Switch 2 Hand Grip Area 3 Sanding Paper Clamp 4 Clamp Lever 7 5 Clamp Lever Lock 6 Dust Bag 7 Paper Punch 8 Base Plate 9 Hook And Loop System (Only for WU645) Not all the accessories illustrated or described are included in standard delivery.
Technical data Vibration information Type WU645 WU645.1 (645~649-designation of machinery, representative of Palm Sander) WU645 Vibration total values (triax vector sum) determined according to EN 60745: • Typical weighted vibration WU645.1 • Voltage • Power input • No load speed • Base size • Orbital diameter • Protection class /II • Machine weight 1.2kg 220-240V~50/60Hz 240W 210W Vibration emission value ah = 6.616m/s2 Uncertainty K =1.
Helping to minimise your vibration exposure risk. ALWAYS use sharp chisels, drills and blades Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate) If the tool is to be used regularly then invest in anti vibration accessories. Avoid using tools in temperatures of 100C or less. Plan your work schedule to spread any high vibration tool use across a number of days. Accessories WU645 Sanding paper WU645.
Operating instructions note: Before using the tool, read the instruction book carefully. Intended Use The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. 1 ON/OFF SWITCH To start your sander, depress the protective cover over the switch at the position marked“I” . To stop your sander, depress the protective cover at the position marked “0”. 2 HAND GRIP AREA You can operate your sander with one hand (See Fig. A).
and secured underneath both Locked Clamps (3). This will ensure safe and efficient sanding performance. 4 CHANGING HOOK & LOOP SANDING PAPER (Only for WU645) The sanding paper and baseplate are provided with a hook and loop attachment system to allow quick and easy changing of the sanding and polishing accessories. Remove any dust or other objects from the hook and loop on the baseplate and sanding paper. Position the sanding paper evenly on the baseplate and firmly press down to attach them together.
(See Fig. D). To refit the bag, firmly push the mounting bracket into the location on the sander housing (See Fig. E). For best performance always empty the dust bag when it is half full. 7 FLUSH SANDING FACILITY Your sander can sand flush on three sides of the base-plate which allows easy access to corners and edges of moulding (See Fig. F). F 8 ORBITAL SANDING Your sander operates in small circular rotations which allows efficient material removal.
Environmental protection Start your sander before sanding and turn off only after stopping sanding. For best results sand wood in the direction of the grit. Do not start sanding without Sanding Paper fitted. Do not allow the Sanding Paper to wear away, it will damage the base-plate. The guarantee does not cover base-plate wear and tear. Use coarse grit paper to sand rough surfaces, medium grit for smooth surfaces and fine grit for the final surfaces. If necessary, first make a test on scrap material.
Plug replacement (UK & Ireland only) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: BLUE =NEUTRAL BROWN = LIVE As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows. The wire which is colored blue must be connected to the terminal which is marked with N.
EC DECLARATION OF CONFORMITY We, Positec Power Tools (Europe) Ltd, PO Box 152, Leeds, LS10 9DS, UK Declare that the product, Description WORX Palm sander Type WU645 WU645.
Copyright © 2012, Positec. All Rights Reserved.