Manual

9
1
Operation instructions
Note: Before using the tool, read the instruction book carefully.
INTENDED USE
The power tool is intended for sawing and separating wooden
materials, plastic, plaster, non-ferrous metals and fasteners (e.g.
nails and clamps) as well as for working on soft wall tiles and for dry
grinding of small surfaces. It is especially suitable for working close to
edges and for flush cutting.
Warning: Before working your tool make sure that no power
cords will be damaged. Unplug your tools before mounting or
replacing accessories.
Do not touch the gear box after long working time, because it could
be hot.
MOUNTING ACCESSORIES (See A1 A2)
Caution: For all work or when changing application tools, always
wear protective gloves. Avoid danger of injury from the sharp edges
of the application tools. Application tools can become very hot while
working, presenting danger of burns!
Warning: To reduce the risk of injury, do not let the
Universal end cut blades or any segment saw blades face back
toward the user’s hand.
Unscrew the bolt and remove the fastening piece (8).
Clean the tool holder, the application tool and the bolt and fastening
piece (8).
Place the application tool exactly onto the hex-shaped tool holder.
Note that the application tool has a flush fit.
A2A1
C1
B2B1
C2
A3
C1
B2B1
C2
A2A1
I
II