Operation Manual

6
LED Worklight EN
1. HANDLE SLEEVE
2.
HANDLE
3. ADJUSTING KNOB
4. HOOK
5. BRACKET SEAT
6. RUBBER PAD
7. BRACKET
8. FRONT COVER
9. ON / OFF SWITCH
Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type WX026 WX026.9(0- designation of
machinery, representative of Lamp)
WX026 WX026.9
Rated voltage 20V
Max*
Charger voltage 100-240V ~ 50/60Hz
Working time 2h
1.5h, 2h, 4h
Lumen 1500LM
Machine weight
2.2kg
1.8kg
*Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
ACCESSORIES
WX026 WX026.9
Battery Pack (2.0Ah
WA3551.1)
1 /
Charger(0.4A WA3760) 1 /
SAFETY POINTS FOR YOUR
FLASHLIGHT/ WORKLIGHT
SAFETY RULES FOR
CORDLESS PORTABLE
HAND-HELD LIGHT
CHARGE BATTERY BEFORE
FIRST USE
CAUTION: Read, understand and
follow all Safety Rules and Operating
Instructions in this Manual before using this
product.
SAVE THESE
INSTRUCTIONS!
READ ALL INSTRUCTIONS!
SAFETY INSTRUCTIONS
WARNING: Be sure to read and
understand all instructions in this
manual before using this portable hand-held
light. Failure to follow all instructions may
result in electric shock, fire and/or serious
personal injury.
1. Know your cordless portable hand-held
light. Read operator’s manual carefully.
Learn its applications and limitations, as well
as the specific potential hazards related to this
light.
2. Use only recommended battery pack and
charging stand / transformer.
Any attempt to use another battery pack will
cause damage to the portable hand-held light
and could possible explode, cause a fire, or
personal injury.
Model Battery Pack
Charging Stand/
Transformer
WX026
WX026.9
*2.0Ah
WA3551.1
*0.4A
WA3760
* Models of charger and battery pack listed above
are for reference only, you can also choose other
models adapted to the work light produced by
our company. Store personnel can assist you
and offer detail advice.
3. Remove battery pack from portable
hand-held light before replacing bulb or
performing any routine maintenance or
cleaning.
4. Let portable hand-held light cool for several
minutes after use before changing the bulb.
5. Do not disassemble the portable hand-held light.
6. Do not place portable hand-held light or battery
pack near fire or heat. They may explode. Also,