Operation Manual

8
LED Worklight EN
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Do not expose to rain or water
Do not burn
Class III
Do not stare at the operating light
source
Li-Ion battery This product has been
marked with a symbol relating to
‘separate collection’ for all battery
packs and battery pack. It will then
be recycled or dismantled in order to
reduce the impact on the environment.
Battery packs can be hazardous for
the environment and for human
health since they contain hazardous
substances.
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
xINR18/65-y: Cylindrical lithium Ion
battery cells with max diameter of
18mm and max height of 65mm;
“x” represents a number cells serial
connected, blank if 1; “-y” represents a
number of cells paralleled connected,
blank if 1.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ACTION FIGURE
BEFORE OPERATION
Charging the battery Pack See Fig. A
Installing the battery pack See Fig. B
Removing the battery pack See Fig. C
OPERATION
Starting & Stopping
To start your light just depress on/off
switch(1) marked “I”.
To stop your light just depress the
on/off switch(1) marked “O”.
WARNING! Do not direct the
light beam into your eyes.
See Fig. D
Placing the light
WARNING! Ensure the
work light is securely
placed to prevent falling object
hazard.
Using the hook to hang the light
WARNING! Do not hang the
work light on any electrical
power cord!
See Fig. E
Using the bracket to set the light
Add: You may use a screw to secure
the work light in place.
See Fig. F
Using the bracket to hang the light See Fig. G
Adjustable head
The work light head can be set in a
variety of positions. To switch base
positions, rotate the adjusting knob to
loosen the light. Adjust head to desired
position , tighten the adjusting knob.
CAUTION! Do not place hands or
fingers between adjustable head and
bracket when positioning work light to
avoid any hazard!
See Fig. H