Instructions / Assembly
Portable Work Table
WX066
SAFETY INSTRUCTIONS
WARNING: This product can expose you to chemicals including lead, phthalate or bisphenol A which are
known to the State of California to cause cancer, birth defects or other reproductive harm. Wash your hands
after use. For more information go to www.P65Warnings.ca.gov.
WARNING: When using this product, always follow basic safety precautions. Failure to follow all
instructions listed below may result in personal injury.
Read all instructions before attempting to operate this product. Save these instructions for future reference.
1. Keep work area clear and well lit.
- Cluttered areas and benches invite injuries.
2. Make sure all moving parts are free from interference.
3. Ensure Pegasus is set up on firm, level ground and is stable.
4. Keep other people away.
- Do not let other people, especially children, not involved in the work touch the tool and keep them away from the work area.
5. Be aware of over-balancing. When a large piece is cut from one end of material supported by Pegasus, the
remaining piece may be heavy enough to tip over. Always ensure the work piece is well supported.
6. Check that table latches are securely locked and legs are fully extended, with tray flat before operating Pegasus.
7. The tool must be used only for its intended purpose. Any use other than those mentioned in
these instructions will be considered a case of misuse.
The manufacturer shall not be liable for any damage or injury resulting from misuse.
8. Never stand on this product.
9. Dress properly
- Do not wear loose clothing or jewelry, which can be caught in moving parts.
- Non-skid footwear is recommended when working outdoors.
- Secure long hair, or wear protective hair covering.
10. Use personal protective equipment
- Use safety glasses.
- Use face or dust mask when working operations create or involve dust.
11. Save all warnings and instructions for future reference. Refer to them frequently and use them
to instruct others using Pegasus. If you loan someone Pegasus, loan them these instructions to prevent
misuse of the product and possible injury.
12. Do not use tools in damp or wet locations. Damp or wet conditions prevent appropriate clamping
pressure and grip on the work piece.
13. Ensure the work piece is clamped firmly and the lock is engaged before use.
14. Check damaged parts. Before using the tool, it should be carefully checked to ensure it will operate
properly and perform its intended function.
15. When not in use, tools should be stored in a secure, dry place, out of the reach of children and
unauthorized usage.
16. Have your Pegasus serviced by a qualified repair person.
17. Warning
- The use of any accessory or attachment other than those recommended in this instruction manual may present
a risk of personal injury.
Warning–To reduce the risk of injury, user
must read instruction manual.
Warning
Pinch points
Lock
Unlock
COMPONENT LIST
A. Clamp dogs (4 pieces)
B. Link locks (2 pieces)
A
B
To use SIDEKICK
TM
, open the legs fully and put the table on the legs. (See Fig. 1)
Rotate the latches as shown to fix the legs and the table. (See Fig. 2)
NOTE: Before using, check that the table is horizontal and all latches lock securely.
Use the recesses for storage. (See Fig. 3)
If desired, SIDEKICK
TM
is compatible with other WORX
®
support products. (See Fig. 4, 5)
To carry SIDEKICK
TM
safely, only transport when folded, hold the table vertically and carry close to the body
by the handle. (See Fig. 6)
1 2
4
6
5
3