SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Lithium-Ion cordless WX170 WX170.1 WX170.2 WX170.3 drill/driver WX170.4 WX170.5 WX170.6 WX170.
3 1 2 4 9 5 8 6 7
A1 A2 1 2 1 3 2 A3 B1 3 2 1 B2 C1 2 3 1 C2 C3
C2 C3 D F E
NOISE INFORMATION 1. KEYLESS CHUCK 2. TORQUE ADJUSTMENT RING A weighted sound pressure 3. TWO-SPEED GEAR CONTROL LpA: 68dB(A) A weighted sound power 4. FORWARD/REVERSE ROTATION CONTROL LwA: 79dB(A) KPA& KWA 5. SOFT GRIP HANDLE Wear ear protection when sound pressure is over 6. BATTERY PACK * 7. BATTERY PACK RELEASE BUTTON 8. ON/OFF SWITCH 9. SIGHT LIGHT TECHNICAL DATA Type WX170 WX170.1 WX170.2 WX170.3 WX170.4 WX170.5 WX170.6 WX170.
vibration accessories. Avoid using tools in temperatures of 10°C or less. Plan your work schedule to spread any high vibration tool use across a number of days. ACCESSORIES 6 WX170 WX170.1 WX170.2 Battery pack 2 1 2 Charger 1 1 1 Double ended bits 1 1 / 158pcs Accessories / / 1 60pcs Accessories / / / WX170.3 WX170.4 WX170.5 Battery pack 2 2 2 Charger 1 1 1 Double ended bits / 1 / 158pcs Accessories 1 / 1 60pcs Accessories / / / WX170.6 WX170.
3. PERSONAL SAFETY 1) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. 2) Use personal protective equipment. Always wear eye protection.
make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. 4) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6. SERVICE 1) Have your power tool serviced by a qualified repair person using only identical replacement parts.
SYMBOLS To reduce the risk of injury, user must read instruction manual Wood Warning Metal Wear ear protection Brick Wear eye protection High speed Wear dust mask Low speed Do not expose to rain or water Wear protective gloves 9 Do not burn Li-I on Do not dispose of batteries, Return exhausted batteries to your local collection or recycling point Hammer drilling Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist.
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for driving in and loosening screws as well as for drilling in wood, metal and plastic. ASSEMBLY AND OPERATION ACTION FIGURE BEFORE OPERATION Removing the battery pack See Fig. A1 Charging the battery See Fig. A2 Installing the battery pack See Fig. A3 LED LIGHT INDICATOR Before operation, the LED light will be activated when the On/Off switch is slightly depressed.
MAINTENANCE Remove the battery pack from the tool before carrying out any adjustment, servicing or maintenance. Your tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots.
LITHIUM ION BATTERY Handle With Care. Do Not Load or Transport Package If Damaged. A Fire Hazard Could Exist. For more information, call: +86-512-65152811 www.worx.com Copyright © 2016, Positec. All Rights Reserved.
