Use And Care Manual

ASSEMBLY AND ADJUSTMENT

Inserting and Removing the Bit

Cartridge

NOTE: Pull the outer ring of the

chuck forward in order to insert or

remove bits.

See Fig.

B1,B2

Forward/Reverse Switch

WARNING: Never change the

direction of rotation when the

chuck is rotating, wait until it is

stopped!

See Fig. C

OPERATION

Operating the On/Off Switch

WARNING: Do not operate

for long periods at low speed

because excess heat will be

produced internally.

See Fig. D

ADJUSTABLE HANDLE

The handle can be ﬁxed at a 0°, 30°

or 60° position.

See Fig. E

LED Light Indicator

MAINTENANCE

Your power tool requires no additional lubrication

or maintenance. There are no user serviceable parts

in your power tool. Never use water or chemical

cleaners to clean your power tool. Wipe clean

with a dry cloth. Always store your power tool in a

dry place. Keep the motor ventilation slots clean.

Keep all working controls free of dust. If you see

some sparks ﬂashing in the ventilation slots, this is

normal and will not damage your power tool.