Instruction manual

ManualsBrandsWorx ManualsPower ToolWX313

物料号：２ＳＤＩ１０３ＰＫ１１０００Ａ３

材料：80克双胶纸

颜色：1色（黑）

尺寸：A5

页数：1２P

装订方式：骑马钉

备注：

特别提示：

此小页为说明书印刷要求，不需要输出菲林,

不作为印刷内容。

Summary of content (13 pages)

PAGE 1
物料号：２ＳＤＩ１０３ＰＫ１１０００Ａ３材料：80克双胶纸颜色：1色（黑）尺寸：A5 页数：1２P 装订方式：骑马钉备注：特别提示：此小页为说明书印刷要求，不需要输出菲林, 不作为印刷内容。
PAGE 2
SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Impact drill WX312 WX312.
PAGE 3
GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
PAGE 4
) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
PAGE 5
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Double insulation Wear eye protection Wear ear protection Wear dust mask Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. Impact drill WX312 WX312.
PAGE 6
1 2 3 9 4 6 8 5 7 1. KEY CHUCK (WX312) 2. DEPTH GAUGE 3. DRILL/HAMMER DRILL FUNCTION SELECTOR 4. FORWARD AND REVERSE ROTATION CONTROL LEVER 5. SWITCH LOCK ON BUTTON 6. VARIABLE SPEED CONTROL 7. ON/OFF SWITCH 8. AUXILIARY HANDLE 9. KEYLESS CHUCK (WX312.1 WX313) * Not all the accessories illustrated or described are included in standard delivery. Impact drill WX312 WX312.
PAGE 7
TECHNICAL DATA Type WX312 WX312.1 WX313 (300-329-designation of machinery, representative of impact drill) WX312 WX312.1 Voltage WX313 230-240V~50Hz Power input 810W 701W No load speed 0-2800/min Impact rate 0-44800/min Chuck capacity Drilling capacity 13mm Masonry 16mm Wood 32mm Steel 13mm Protection class /II Machine weight 2.42kg NOISE/VIBRATION INFORMATION A weighted sound pressure LpA = 87.4dB(A) LwA = 98.4dB(A) A weighted sound power KPA & KWA 3.
PAGE 8
How the tool is used and the materials being cut or drilled. The tool being in good condition and well maintained The use the correct accessory for the tool and ensuring it is sharp and in good condition. The tightness of the grip on the handles and if any anti vibration accessories are used. And the tool is being used as intended by its design and these instructions. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
PAGE 9
OPERATION NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. A 1. AUXILIARY HANDLE (See Fig. A) Slide the handle onto the drill and rotate to the desired working position. To clamp the auxiliary handle rotates the handgrip clockwise. To loosen the auxiliary handle rotate the hand grip anti-clockwise. Always use the auxiliary handle. 2.
PAGE 10
tool just depress and release the on/off switch. 6. VARIABLE SPEED CONTROL (See Fig. E) Adjust the variable speed control to increase or decrease the speed according to the material and accessory to be used (also possible during no load operation). Low speed will provide low torque and high speed gives higher torque. 7. FORWARD AND REVERSE ROTATION CONTROL (See Fig. F) For drilling use forward rotation marked “ ” (lever is moved to the left).
PAGE 11
MAINTENANCE Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots.
PAGE 12
DECLARATION OF CONFORMITY We, Positec Power Tools (Europe) Ltd, PO Box 152, Leeds, LS10 9DS, UK Declare that the product, Description WORX Impact drill Type WX312 WX312.