Operation Manual

ManualsBrandsWorx ManualsDrillWX369.4

Nickel-Cadmium

Impact drill

WX369.3 WX369.4

SAFETY AND OPERATING MANUAL

ORIGINAL INSTRUCTIONS

Summary of content (12 pages)

PAGE 1
SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Nickel-Cadmium Impact drill WX369.3 WX369.
PAGE 2
GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1. WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
PAGE 3
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. BATTERY TOOL USE AND CARE a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
PAGE 4
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Do not expose to rain or water 4 Do not burn Ni-Cd battery. This product has been marked with a symbol relating to ‘separate collection’ for all battery packs and battery pack. It will then be recycled or dismantled in order to reduce the impact on the environment.
PAGE 5
11 10 1 2 9 6 3 8 5 4 7 5 Nickel-Cadmium Impact drill WX369.3 WX369.
PAGE 6
VIBRATION INFORMATION 1. TORQUE ADJUSTMENT RING 2. CHUCK 3. AUXILIARY HANDLE * 4. BATTERY PACK RELEASE BUTTON 5. SIGHT LIGHT 6. ON/OFF SWITCH Vibration total values (triax vector sum) determined according to EN 60745: Impact drilling into concrete Drilling into metal 7. BATTERY PACK * 8. SOFT GRIP HANDLE 9. FORWARD/REVERSE ROTATION CONTROL 11. TWO-SPEED GEAR CONTROL * Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA Type WX369.3 WX369.
PAGE 7
ACCESSORIES Model no. ACCESSORIES WX369.3 1 x 3h charger 2 x 1.5Ah Ni-Cd Battery 1 x Auxiliary Handle WX369.4 1 x 3h charger 2 x 1.3Ah Ni-Cd Battery pack 1 x Auxiliary Handle 1 x15pcs split We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. 7 Nickel-Cadmium Impact drill WX369.3 WX369.
PAGE 8
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for the screwing in and loosening of screws as well as for drilling in wood, metal and plastic. A BEFORE PUTTING INTO OPERATION - BATTERY CHARGING A battery that is new or has not been used for a longer period does not develop its full capacity until after several chargin / discharging cycles.
PAGE 9
C When using the drill in the HI speed range, the speed will increase and the drill will have less power and torque. Gear I Low speed range: for screwdriving or working with large drilling diameter Gear II High speed range: for working with small drilling diameter WARNING: To prevent gear damage, always allow the chuck to come to a complete stop before changing the direction of rotation or the two-speed gear control. 6. CHUCK ADJUSTMENT To open the chuck jaws, rotate the front section of the chuck.
PAGE 10
drilling operation. The Bubble level is recessed in the motor housing on the back of the drill. It can be used to keep the drill level during vertical drilling operation. 11. DRILLING When drilling into a hard smooth surface, use a center punch to mark the desired hole location. This will prevent the drill bit from slipping off center as the hole is started. Hold the tool firmly and place the tip of the bit at the point to be drilled. Depress the switch trigger to start the tool.
PAGE 11
DECLARATION OF CONFORMITY We, Positec Power Tools (Europe) Ltd, PO Box 6242, Newbury, RG14 9LT, UK Declare that the product, Description WORX Battery-powered Drill Type WX369.4 WX369.