Operation Manual

6
Nickel-Cadmium
Impact drill
WX369.3 WX369.4
1. TORQUE ADJUSTMENT RING
2. CHUCK
3. AUXILIARY HANDLE *
4. BATTERY PACK RELEASE BUTTON
5. SIGHT LIGHT
6. ON/OFF SWITCH
7. BATTERY PACK *
8. SOFT GRIP HANDLE
9. FORWARD/REVERSE ROTATION CONTROL
10. BUBBLE LEVEL
11. TWO-SPEED GEAR CONTROL
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type WX369.3 WX369.4 (3 - designation of
machinery, representative of hammer drill)
Model no. WX369.3 WX369.4
Voltage 18V
No load speed 0-350/0-1300/min
No load impact frequency
0-5600/0-20800/min
Number of clutch position 20+1+1
Max torque 50N.m
Chuck capacity 13mm
Max.
drilling
capacity
Steel 13mm
Wood 38mm
Masonry/
Concrete
16mm
Machine weight 2.4kg
NOISE INFORMATION
A weighted sound pressure L
pA
: 87dB(A)
A weighted sound power L
wA
: 98dB(A)
K
PA
&K
WA
3.0dB(A)
Wear ear protection when sound
pressure is over
80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 60745:
Impact drilling into
concrete
Vibration emission value
a
hID
=11.66m/s²
Uncertainty K = 1.5 m/s²
Drilling into metal
Vibration emission value
a
hD
= 2.76m/s²
Uncertainty K = 1.5 m/s²
Screwdriving without
impact
Vibration emission value
a
h
= 0.99m/s²
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well main-
tained.
The use the correct accessory for the tool and ensur-
ing it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10
0
C or less.
Plan your work schedule to spread any high vibration
tool use across a number of days.