SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Lithium-Ion cordless hammer drill WX371 WX371.3 WX371.
1 2 3 4 8 9 5 7 6 A1 A2 1 2 1 3 2 A3 B1
A3 B1 3 2 1 B2 C1 2 3 1 C2 C3 D E1 1-18
D E1 E2 E3 F 1-18
VIBRATION INFORMATION 1. CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR CONTROL 4. FORWARD/REVERSE ROTATION CONTROL 5. SOFT GRIP HANDLE 6. BATTERY PACK * 7. BATTERY PACK RELEASE BUTTON 8. SIGHT LIGHT 9. ON/OFF SWITCH Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal TECHNICAL DATA Type WX371 WX371.3 WX371.9 (3-designation of machinery, representative of hammer drill) WX371 WX371.3 WX371.
ACCESSORIES WX371 WX371.3 WX371.9 Charger 1 1 / Battery pack 1 2 / Double Ended Bit (PH2/ SL5.5) 1 1 1 We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
d) e) f) g) 8 source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools.
o) Do not use any battery pack which is not designed for use with the equipment. p) Keep battery pack out of the reach of children. q) Retain the original product literature for future reference. r) Remove the battery from the equipment when not in use. s) Dispose of properly.
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for driving in and loosening screws as well as for drilling in wood, metal and plastic. ASSEMBLY AND OPERATION ACTION FIGURE BEFORE OPERATION Removing the battery pack See Fig. A1 Charging the battery pack See Fig. A2 Installing the battery pack See Fig.
used a Battery Pack for a prolonged time will reduce the Battery Pack working time. This can be corrected after several charge and discharge operations by charging & working with your drill. Heavy working conditions such as large screws into hard wood will use up the Battery Pack energy faster than lighter working conditions. Do not re-charge your Battery Pack below 0oC and above 45oC as this will affect performance.
www.worx.com Copyright © 2015, Positec. All Rights Reserved.
