SAFETY AND OPERATING MANUAL Jigsaw WX472
1 2 3 4 5 12 6 11 10 9 8 7 13 A2 A1 3 2 1 2 1 B C
B C D E1 1 2 E2 19 F G 19 H
G H 19 1 2 I1 3 14 4 I2 19 J
1. VARIABLE SPEED CONTROL 2. LOCK-ON BUTTON 3. ON/OFF SWITCH 4. SOFT GRIP HANDLE 5. ALLEN KEY 6. BLADE STORAGE 7. ANGLE PLATE 8. BASE PLATE 9. ROLLER GUIDE 10. PROTECTION FINGER 11. PENDULUM FUNCTION CONTROL 12. DUST COVER 13. PARALLEL GUIDE 14. PARALLEL GUIDE FIXTURE (See Fig. I1) Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA Type WX472(460-479-designation of machinery, representative of Jig Saw) Rated voltage 230-240V~50/60Hz Rated power 550W Rated No-load speed 800-2600/min Stroke length 20mm Protection class /II Cutting capacity, max. thickness: Weight Wood 65mm Aluminum 12mm Steel 6mm 2kg ACCESSORIES Allen key Parallel guide Metal cutting blade Wood cutting blade Aluminum cutting blade 1 1 1 1 1 We recommend that you purchase your accessories from the same store that sold you the tool.
GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 8 1 WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
SYMBOLS To reduce the risk of injury, user must read instruction manual Unlock Double insulation RCM marking Warning ABN: Australian Business Number, according to which business details such as business name and address can be found at website http://abr. business.gov.au Wear ear protection Wear eye protection Wear dust mask 10 Before any work on the machine itself, pull the mains plug from the socket outlet.
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Always wear a dust mask. Recommendation that the tool always be supplied via a residual current device with a rated residual current of 30 mA or less. INTENDED USE: The machine is intended for sawing wood, plastic, metal and building materials while resting firmly on the workpiece. It is suitable for straight and curved cuts with mitre angles to 45°. The saw blade recommendations are to be observed.
www.worx.com Copyright © 2014, Positec. All Rights Reserved.