Use and Care Guide

Cordless Circular Saw EN
9
1. SAFETY BUTTON
2. ON/OFF SWITCH
3. FRONT HAND GRIP
4. CUTTING MARK, 0°
5. CUTTING MARK,45°
6. MAIN-BASE PLATE
7. BASE PLATE BEVEL LOCK KNOB
8. BASE PLATE BEVEL ANGLE SCALE
9. HEX KEY
10. BATTERY PACK*
11. BATTERY PACK RELEASE BUTTON*
12. FIXED GUARD
13. DUST EXTRACTION OUTLET
14. LOWER GUARD LEVER
15. EXACTRACKTM SUB-BASE PLATE
16. SAW BLADE
17. OUTER FLANGE
18. BLADE BOLT
19. LOWER BLADE GUARD
20. SPINDLE
21. INNER FLANGE
22. CUTTING DEPTH SCALE (SEE FIG. C)
23. CUTTING DEPTH LOCK KNOB (SEE FIG. C)
24. SWITCH LEVER (SEE FIG. C)
25. DUST ADAPTER (SEE FIG. H)
*Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
WX530L WX530L.9
Rated voltage 20V Max**
No load (rated) speed 4900/min
Blade size 6-1/2’’
Arbor size 5/8’’
Cutting capacity
Cutting Depth at 45°
Cutting Depth at 90°
1-17/32’’
2-5/32’’
Bevel capacity
0-50°
Machine weight
5.9 lbs 5.1 lbs
**Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
ACCESSORIES
WX530L WX530L.9
Carbide Tipped Blade 1 1
Vacuum adapter 1 1
Hex Key 1 1
Battery Pack 1 /
Charger
1 /
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.