SAFETY AND OPERATING MANUAL 12V Li-Ion multi-purposed saw WX540 WX540.3 WX540.
General Power Tool Safety Warnings WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term power tool in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dustrelated hazards. 4) a) Power tool use and care Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.
the operator an electric shock 3. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. 4. Always wear safety glasses or eye shields when using the jig saw. Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses. Following this rule will reduce the risk of serious personal injury. 5.
SYMBOLS To reduce the risk of injury, user must read instruction manual. Double insulation Warning Wear ear protection Wear eye protection Wear dust mask Do not expose to rain or water Do not burn Always charge the battery pack between temperatures 0oC to 30oC C-Tick approval mark 12V Li-Ion multi-purposed saw WX540 WX540.3 WX540.
5 4 3 2 1 6 7 9 10 12V Li-Ion multi-purposed saw 11 12 WX540 WX540.3 WX540.
1. On/Off Switch 2. Lock-off button 3. Hand Grip Areas 4. Pivot release lever 5. Motor cover 6. Protection finger 7. Blade holder 8. LED work light (See Fig. G1) 9. Foot plate 10. Base Plate 11. Battery release button 12. Battery pack 13. Charger (See Fig. A) 14. Charged Indicator Light (See Fig. A) 15. Blade (See Fig. F) ﹡ Not all the accessories illustrated or described are included in standard delivery. 12V Li-Ion multi-purposed saw WX540 WX540.3 WX540.
TECHNICAL DATA Rated voltage 12V No load speed 2200/min Stroke length 16mm Cutting capacity, max. thickness Wood 50mm PVC pipe 45mm Steel 4mm Machine weight 1.2kg ACCESSORIES Charger WX540 WX540.3 WX540.9 3-5h 30min / Li-Ion battery pack 1 1 / metal cutting blade 1 1 1 wood cutting blade 1 1 1 aluminum cutting blade 1 1 1 You can only use the blade type shown in Fig F. Don’t use other blade types.
OPERATING INSTRUCTIONS 14 NOTE: Before using the tool, read the instruction book carefully. Intended use The machine is 2 saws in 1 tool with rep saw and jig saw function, intended for sawing wood, plastic, metal and building materials while resting firmly on the workpiece. It is suitable for straight and curved cuts. 13 A1 CHARGING PROCEDURE 1. CHARGING YOUR BATTERY PACK Warning! The charger and battery pack are specifically designed to work together so do not attempt to use any other devices.
C Position VI Position I 0-90O D E1 4. TO REMOVE OR INSTALL BATTERY PACK (See Fig. B) Locate buttons on side of battery pack and depress both sides to release battery pack from your tool. Remove battery pack from your tool. After recharge insert the battery pack into the battery port. A simple push and slight pressure will be sufficient. ADJUSTMENT Function of this tool is the combination of a jigsaw and a reciprocating saw, which is realized by operating the pivot release lever (4).
——INSERTING THE SAW BLADE (See Fig. F-H) Wear protective gloves when assembling the saw blade. Contact with the saw blade can lead to injuries. You can only use the blade type shown in Fig F. The machine is equipped with a tool-free blade holder (7). This makes possible easy and quick changing of the saw blade without any additional tools. Rotate the ring counterclockwise and hold in position.
2 1 I I OPERATION Warning: Always wear eye protection while operating this or any other power tool. Warning: Burn hazard. Do not touch the blade immediately after use. Contact with the blade may result in personal injury. Before you begin work, ensure the material to be cut is rigid. Small workpieces should be securely clamped to a work table. 1. SWITCHING ON AND OFF (See Fig.
breakage. Any cut which puts pressure on the blade, such as angle or scroll cuts, increases potential for vibration, kickback and blade breakage. Warning: Shock hazard. Use extra caution when cutting overhead and pay particular attention to overhead wires which may be hidden from view. Warning: Use extra caution when cutting overhead and anticipate the path of falling branches and debris ahead of time.
Copyright © 2013, Positec. All Rights Reserved.