Operation Manual

20V Li-Ion multi-purpose saw EN
11
TROUBLESHOOTING
Symptom
Possible
Causes
Possible
Solution
The tool
suddenly
stops during
operation.
Over load
Battery
temperature
too high
Low battery
capacity
Relieve the
load on the
machine
immediately
and allow
cooling for
approx. 30
seconds by
running the
machine on
no-load.
Charge the
battery pack.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description WORX Li-ion Multi-Purpose Saw
Type WX550 WX550.1 WX550.9 (5-designation
of machinery, representative of Saw)
Function Sawing various materials
Complies with the following Directives,
2006/42/EC
2011/65/EU
2014/30/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-11
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe) Ltd, PO
Box 6242, Newbury, RG14 9LT, UK
Suzhou 2017/04/18
Allen Ding
Deputy Chief Engineer,Testing & Certification