Operation Manual

9
Oscillating Tool EN
Oscillation Frequency Application
High oscillation frequency: Sanding, sawing, rasping and polishing stone and metal.
Low oscillation frequency: Scraping, polishing varnishes.
APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and
application.
The workpiece must be clamped tightly before it is cut.
Pic Description Application
Sawing
Bi-Metal
Metal/Wood End Cut Blade
Wood, plastic, fiberglass, nails,
non-ferrous metals, thin sheet
metal, hardened fillers.
Standard Wood End Cut Blade Wood, plastic, drywall.
Precision Wood Cut Blade Wood, soft plastics.
HSS Semicircle Saw Blade
Thin wood, plastic, fiberglass,
non-ferrous metals, thin
sheet metal, hardened fillers,
window glazing.
Sanding
Sanding Pad (Perforated) Wood, plastic, hardened fillers.
Sanding Finger Pad Wood, plastic, hardened fillers.
Rasping
Triangular Carbide Grit Rasp
Wood, hardened adhesives,
thin set, masonry.
Carbide Rasp (Finger Shaped)
Wood, hardened adhesives,
thin set, masonry.
Removing
grout
Carbide Grit Semicircle Saw
Blade
Grout, porous concrete,
masonry.
Diamond-Coated Semicircle
Saw Blade
Ceramic and stone tile,
backerboard.
Scraping
Rigid Scraper Blade
Old paint, hardened adhesives,
caulk, carpet.
Flexible Scraper Blade
Elastic sealants, paint,
adhesive residues, carpet.