Operation Manual

Angle grinder EN
15
PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the fitted plug then fol-
low the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL BROWN =LIVE
As the colors of the wires in the mains lead of
this appliance may not correspond with the
colored markings identifying the terminals
in your plug, proceed as follows. The wire
which is colored blue must be connected
to the terminal which is marked with N.
The wire which is colored brown must be
connected to the terminal which is marked
with L.
WARNING!Never connect live or
neutral wires to the earth terminal of
the plug. Only fit an approved 13ABS1363/A
plug and the correct rated fuse.
NOTE: If a moulded plug is fitted and has
to be removed take great care in disposing
of the plug and severed cable, it must be
destroyed to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description
WORX Angle grinder
Type
WX721 WX722 WX722.1 (7- designation
of machinery, representative of Angle
grinder)
Function Peripheral and lateral grinding
Complies with the following directives,
2006/42/EC
2004/108/EC
2011/65/EU
Standards conform to:
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60745-1
EN 60745-2-3
The person authorized to compile the
technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds, LS10 9DS, UK
2014/01/16
Leo Yue
POSITEC Quality Manager