Operation Manual

Angle grinder EN
7
TECHNICAL DATA
Type WX721 WX722 WX722.1 (7- designation of machinery, representative of angle
grinder)
WX721 WX722 WX722.1
Voltage 220-240V~50/60Hz
Power input 1010W 1200W
Rated speed 12000/min
Speed control adjustment
/ 3500-12000/min
Disc size 125mm
Disc bore 22.2mm
Spindle thread M14
Protection class
/II
Machine weight 2.2kg
NOISE INFORMATION
A weighted sound pressure L
pA
: 87.3dB(A)
A weighted sound power L
wA
: 98.3dB(A)
K
pA
&K
wA
3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h
=5.20m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut .
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.