SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Lithium-Ion cordless angle grinder WX800 WX800.
1 2 7 3 4 5 6 13 12 11 14 10 9 8
A2 A1 1 2 A3 B C1 C2 9 10 C3 2 D 7 9 7 10
C3 D 2 1 E F 15o-30o G
VIBRATION INFORMATION 1. AUXILIARY HANDLE 2. SPINDLE LOCK BUTTON 3. ON / OFF SWITCH 4. BATTERY PACK RELEASE BUTTON 5. BATTERY PACK * 6. WHEEL GUARD FOR GRINDING 7. DISC* 8. SPANNER 9. INNER FLANGE 10. OUTER FLANGE 11. CLAMP ADJUSTMENT NUT 12. SPINDLE 13. GUARD CLAMPING LEVER 14. WHEEL GUARD FOR CUTTING* Vibration total values (triax vector sum) determined according to EN 60745: Surface grinding or abrasive cutting off TECHNICAL DATA Type WX800 WX800.
2.0Ah Battery(WA3551.1) 2 / 1Hr Charger (WA3860) 1 / We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
g) 5. a) b) c) d) 6. a) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. BATTERY TOOL USE AND CARE Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
p) 8 coolants. Using water or other liquid coolants may result in electrocution or shock. Your hand must hold on the handle when you are working. Always use the auxiliary handles supplied with the tool. Loss of control can cause personal injury. FURTHER SAFETY INSTRUCTIONS FOR ALL OPERATIONS Kickback and Related Warnings Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory.
cut” into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback. SAFETY WARNINGS FOR BATTERY PACK a) Do not dismantle, open or shred cells or battery pack. b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials.
Removing the battery pack See Fig. A1 Adjusting Wheel Guard NOTE: Before any work on the machine itself, remove the battery pack. For work with grinding or cutting discs, the protection guard must be mounted. Use the correct type of disc for your application. If the power tool is intended to perform cutting off operations, a guard specific for this operation must be fitted. The coded projection on the wheel guard ensures that only a guard that fits the machine type can be mounted.
5. When cutting very hard material best results can be achieved with a diamond disc. 6. When using a diamond disc it will become very hot. If this happens you will see a full ring of sparks around the rotating disc. Stop cutting and allow to cool at no load speed for 2-3 minutes. 7. Always ensure the workpiece is firmly held or clamped to prevent movement. MAINTENANCE Remove the battery before carrying out any adjustment, servicing or maintenance. There are no user serviceable parts in your power tool.
LITHIUM ION BATTERY Handle With Care. Do Not Load or Transport Package If Damaged. A Fire Hazard Could Exist. For more information, call: +86-512-65152811 www.worx.com Copyright © 2016, Positec. All Rights Reserved.
