Users Manual

40
Basic Operation
(4) [MEMCH] Save Channel Hotkey
When in Channel mode, channel information can be saved to the specied channel
with the exception of Channel Name and Channel Scan settings.
When in Frequency (VFO) mode, you can set the oset frequency (see MENU 4, p
48), frequency shift direction (see MENU 7, p 42) and other options, then save
them the specied channel.
For example, to save a channel in Frequency mode with a 462.550 receive frequency
and a 467.550 transmit frequency and a 67.0 transmit CTCSS tone:
1. Tune to 462.550. the frequency, press [MENU] + [2] + [8] to enter the Trans-
mit CTCSS setting, press [UP] / [DOWN] to select the 67.0 tone, and then press
[MENU] to conrm.
2. Press [MENU] + [4] and set the oset to 005.000 MHz. is is the the dierence
between the TX and RX frequencies.
3. Press [7] on the hand microphone until a “+” appears on the display. is sets the