Instruction Manual

Setting the Date and Time
7
Date
Press the
“POWER”
button
Press the
“POWER” button
Minute
Month
Press the
“POWER” button
Hour
Press the
“POWER”
button
It is necessary to set the date and time for the unit every time batteries
are initially installed or replaced.
While in power off mode, press the Date and Time Set button to
enter Date and Time setting procedure and the Year value will
begin to flash.
Press the MEMORY button to advanced the display to the desired
year, then press the Power button to confirm the year.
Next, the month will blink. Repeat step 2 to finish the setting
procedure.
After finishing the setting, the device will automatically exit out of
the date/time setting mode and briefly show the word OFF before
shutting down.
(1)
(2)
(3)
(4)