Instruction Manual

Memory Function
12
(1) In power off mode, press and release the MEMORY button. The
device will show the average value of the latest three records.
(2) Continue to press the MEMORY button to successively view the
next previously stored measurements. Measurement data will
appear on the display form most current to oldest; the memory
number will appear on the lower left corner.
(3) All results for a given measurement will display, including
measurement results, pulse rate, Hypertension indicator, irregular
heartbeat alert and date/time stamp.
(4) Each memory bank stores up to 60 readings; when the number of
reading exceeds 60, the oldest data will be replaced with the new
record.
(5) Press the Power button to turn the monitor OFF at any time during
review of the stored measurements.
Clearing Measurements from Memory
In power off mode, press and hold down the "MEM” Button until the
display shows CLr. This indicates that all measurements data have been
erased.
Display the average of data
by pressing “MEM “button
Keep pressing the MEM button
M
M