Instruction Manual

EMC Tables
19
Guidance and manfacturer’s declaration-electromagnetic emissions
The GSH822 Blood Pressure Monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of the GSH822 Blood
Pressure Monitor should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment guidance
The GSH822 Blood Pressure Monitor uses RF
energy only for its internal function. Therefore,
its RFemissions are very low and are not likely
to cause any interference in nearby electronic
equipment.
The GSH822 Blood Pressure Monitor is
suitable for use in all establishment, including
domestic establishments and those directly
connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes.
Group1
RF emissions
CISPR11
RF emissions
CISPR11
Harmonic emissions
IEC 31000-3-2
Voltage fluctuations/
flicker emissions
IEC 31000-3-3
Class B
Not
applicable
Not
applicable
Guidance and manfacturer’s declaration-electromagnetic immunity
The GSH822 Blood Pressure Monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of the GSH822 Blood
Pressure Monitor should assure that it is used in such an environment.
Immunity test IEC 60601
test level
Compliance
level
Electromagnetic environment guidance
Floors should be wood, concreat or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30%.
Power frequency magnetic field should
be at levels characteristic of a typical
location in a typical commercial or hospital
environment .
± 6 kv
contact
± 8 kv air
± 6 kv
contact
± 8 kv air
Electrostatic
discharge
(ESD)
IEC 61000-4-2
Power
frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m 3 A/m