User's Manual

Function LED Behavior Description

Bluetooth Pairing

Press the Enter button on the remote. The sound bar will be discoverable for 15 minutes.

Your can now search for the sound bar (SHOCKWAVE PRO 5.1) using your Bluetooth

device. The sound bar will power down if no device is found. Note: Set your Bluetooth

device into pairing mode prior to the sound bar.

LEDs flash from left to right and

back continuously when searching

for devices.

Demo Track

Press the Enter button on the Remote. The Sound Bar will play the Nakamichi

Demonstration Track. Use this track to adjust volume levels of the Center, Rear and

Subwoofer or the balance of the Rear Speakers.

LEDs flash from left to right and

back continuously when searching

for devices.

Reset

Press the Next/Previous and Enter buttons to select and reset your remote and sound bar

to the factory default settings. All paired Bluetooth devices will be unpaired. All programmed

IR remotes will also be removed.

Upon Reset all LEDs will blink

once.